aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2019-01-02tests: ListFds(): filter out pipe and eventpoll fdsJakob Unterwurzacher
These are created on demand by the Go runtime and are usually not interesting.
2019-01-02tests: make MountInfo field accessibleJakob Unterwurzacher
Tests outside the test_helpers package may want to look at this.
2019-01-02tests: reverse: add ctlsocket cleanup delayJakob Unterwurzacher
2019-01-01tests: ListFds: show r/w statusJakob Unterwurzacher
Also, drop entries that disappear while we stat them.
2019-01-01tests: split mount_unmount.go from helpers.goJakob Unterwurzacher
With the FD leak logic, the mount/unmount functions have become complex enough to give them their own file.
2019-01-01tests: detect fd leaks on unmountJakob Unterwurzacher
For now, this only prints a message but does not fail the tests.
2019-01-01tests: teach ListFds() to check other processesJakob Unterwurzacher
2019-01-01tests: save gocryptfs process id in test_helpers.MountPIDJakob Unterwurzacher
This will allow to tests to monitor fd usage and maybe other things.
2019-01-01fusefrontend: xattr: fix hang on FIFOsJakob Unterwurzacher
An Open() a fifo blocks until it is opened for writing. This meant that xattr operations on FIFOs would block. Pass O_NONBLOCK to fix that, and add a test.
2019-01-01fusefrontend: make GetXAttr() symlink-safe on LinuxJakob Unterwurzacher
Uses the /proc/self/fd trick, which does not work on Darwin.
2019-01-01tests: add Flistxattr/Fgetxattr/Fremovexattr testsJakob Unterwurzacher
Test for the upcoming fd-based xattr support.
2019-01-01fusefrontend: make Access() symlink-safe.Jakob Unterwurzacher
Make Access() symlink-safe through use of faccessat.
2018-12-27Assorted spelling fixes.Sebastian Lackner
Mostly detected with the 'codespell' utility, but also includes some manual grammar fixes.
2018-10-11tests: fix golint errorJakob Unterwurzacher
Error was: tests/cli/cli_test.go:552: declaration of "err" shadows declaration at tests/cli/cli_test.go:544
2018-10-11tests: add idle timeout testJakob Unterwurzacher
Mount with idle timeout 10ms and check that the process exits by itself within 5 seconds.
2018-10-10tests: catch "name too long" symlink failure on XFSJakob Unterwurzacher
Retry with length 1000 if length 4000 fails, which should work on all filesystems. Failure was: --- FAIL: TestTooLongSymlink (0.00s) correctness_test.go:198: symlink xxx[...]xxxx /tmp/xfs.mnt/gocryptfs-test-parent/549823072/365091391/TooLongSymlink: file name too long https://github.com/rfjakob/gocryptfs/issues/267
2018-10-10tests: respect TMPDIR if setJakob Unterwurzacher
Setting TMPDIR now allows to run the tests against a directory of your choice, making it easier to test different filesystems.
2018-09-23fusefrontend: get rid of os.File* wrappingJakob Unterwurzacher
Directly use int file descriptors for the dirfd and get rid of one level of indirection.
2018-09-23tests: add symlink_race toolJakob Unterwurzacher
Help uncover symlink races.
2018-09-22tests: detect and report chmod failures earlierJakob Unterwurzacher
Instead of reporting the consequence: matrix_test.go:906: modeHave 0664 != modeWant 0777 Report it if chmod itself fails, and also report the old file mode: matrix_test.go:901: chmod 000 -> 777 failed: bad file descriptor
2018-09-18main: sanitize commas from fsnameJakob Unterwurzacher
The cipherdir path is used as the fsname, as displayed in "df -T". Now, having a comma in fsname triggers a sanity check in go-fuse, aborting the mount with: /bin/fusermount: mount failed: Invalid argument fuse.NewServer failed: fusermount exited with code 256 Sanitize fsname by replacing any commas with underscores. https://github.com/rfjakob/gocryptfs/issues/262
2018-09-08fusefrontend: use OpenDirNofollow in openBackingDirJakob Unterwurzacher
Rename openBackingPath to openBackingDir and use OpenDirNofollow to be safe against symlink races. Note that openBackingDir is not used in several important code paths like Create(). But it is used in Unlink, and the performance impact in the RM benchmark to be acceptable: Before $ ./benchmark.bash Testing gocryptfs at /tmp/benchmark.bash.bYO: gocryptfs v1.6-12-g930c37e-dirty; go-fuse v20170619-49-gb11e293; 2018-09-08 go1.10.3 WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.07979 s, 243 MB/s READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.882413 s, 297 MB/s UNTAR: 16.703 MD5: 7.606 LS: 1.349 RM: 3.237 After $ ./benchmark.bash Testing gocryptfs at /tmp/benchmark.bash.jK3: gocryptfs v1.6-13-g84d6faf-dirty; go-fuse v20170619-49-gb11e293; 2018-09-08 go1.10.3 WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.06261 s, 247 MB/s READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.947228 s, 277 MB/s UNTAR: 17.197 MD5: 7.540 LS: 1.364 RM: 3.410
2018-09-08tests: restore Go 1.7 compatibilityJakob Unterwurzacher
Go 1.7 does not have t.Name() yet.
2018-09-08syscallcompat: use O_PATH in OpenDirNofollowJakob Unterwurzacher
This fixes the "0100 directory" problem in reverse mode, and should be slightly faster.
2018-09-08tests: add chmod testJakob Unterwurzacher
Makes sure we don't add regressions when fixing https://github.com/rfjakob/gocryptfs/issues/259
2018-09-08tests: restore TestUtimesNanoSymlinkJakob Unterwurzacher
The function seems to have been renamed by 426b9536 by mistake. Rename it back so the test is run again.
2018-09-08main: don't read the config file twice (fix pipe bug)Jakob Unterwurzacher
Instead, first Load() the file, then DecryptMasterKey(). Fixes https://github.com/rfjakob/gocryptfs/issues/258
2018-09-08configfile: add LoadAndDecrypt wrapperJakob Unterwurzacher
Callers that do not want to decrypt the masterkey should call plain Load(). https://github.com/rfjakob/gocryptfs/issues/258
2018-08-15main: add -e as an alias for -excludeJakob Unterwurzacher
2018-08-11reverse mode: add --exclude optionJakob Unterwurzacher
https://github.com/rfjakob/gocryptfs/issues/235
2018-08-11tests: VerifyExistence: panic on inconsistent resultsJakob Unterwurzacher
In the past we did not check whether all methods of checking the file return the same result. We should.
2018-07-01fsck: handle sparse files efficiently, fix xfstests generic/285Jakob Unterwurzacher
If we encounter a 128KB block of zeros, try to skip to the next data section by calling File.SeekData(). This fixes xfstests generic/285, which creates a 17TB sparse file, and runs fsck afterwards. Without this optimization, fsck would take ages.
2018-07-01trezor: add TrezorPayloadJakob Unterwurzacher
TrezorPayload stores 32 random bytes used for unlocking the master key using a Trezor security module. The randomness makes sure that a unique unlock value is used for each gocryptfs filesystem.
2018-07-01configfile: reduce function name stutterJakob Unterwurzacher
configfile.LoadConfFile() -> configfile.Load() configfile.CreateConfFile() -> configfile.Create()
2018-07-01trezor: exit with usage error if used together with -extpassJakob Unterwurzacher
Using an external program for the Trezor PIN is not supported at the moment.
2018-07-01trezor: add basic "-init -trezor" testJakob Unterwurzacher
Verify that the Trezor feature flag is set after "-init -trezor".
2018-07-01trezor: add skeleton for Trezor supportJakob Unterwurzacher
readpassword.Trezor() is not implemented yet and returns a hardcoded dummy key.
2018-06-07main: accept -dev, -nodev, -suid, -nosuid, -exec, -noexecJakob Unterwurzacher
When mounted via /etc/fstab like this, /a /b fuse.gocryptfs default 0 0 we always get extra options passed. As reported by @mahkoh at https://github.com/rfjakob/gocryptfs/pull/233 : mount passes `-o noexec` if `-o user` is set and `-o exec` is not set. If both `-o user` and `-o exec` are set, it passes `-o exec`. Make these options work, and in addtion, also make -suid and -rw work the same way. Reported-by: @mahkoh
2018-06-05main: make prefixOArgs errors testableJakob Unterwurzacher
By returning an error instead of calling os.Exit, error cases can be tested easily. Error cases were not tested until now.
2018-05-27xattr: use LGet/LSet etcJakob Unterwurzacher
Support has been merged into the xattr package ( https://github.com/pkg/xattr/pull/29 ), use it.
2018-05-17tests: add "mv broken symlink" testJakob Unterwurzacher
This currently fails because we do not use llistxattr yet.
2018-05-15xattr: return EOPNOTSUPP for unsupported attributesJakob Unterwurzacher
mv is unhappy when we return EPERM when it tries to set system.posix_acl_access: mv: preserving permissions for ‘b/x’: Operation not permitted Now we return EOPNOTSUPP like tmpfs does and mv seems happy.
2018-05-10fsck: update testcases with binary xattrsJakob Unterwurzacher
2018-05-10xattr: optimize storage, store as binary instead of bae64Bolshevik
Values a binary-safe, there is no need to base64-encode them. Old, base64-encoded values are supported transparently on reading. Writing xattr values now always writes them binary.
2018-05-04tests: example_filesystems: create a private copy in /tmpJakob Unterwurzacher
The tests write to the example_filesystems folder, which 1) May leave your source tree in a modified state 2) Triggers test failures when the fsck tests run concurrently, which happens on Travis CI every now and then. Fix both problem by copying the example_filesystems folder to a private location in /tmp.
2018-04-27tests: helpers: fix a few error reportsJakob Unterwurzacher
These were using stale err values.
2018-04-08Fix the easy golint warningsJakob Unterwurzacher
Reported by https://goreportcard.com/report/github.com/rfjakob/gocryptfs
2018-04-08tests: retry umountJakob Unterwurzacher
Gnome may still have files open causing spurious test failures.
2018-04-07tests: cli_test: fix fd leakJakob Unterwurzacher
One fd leak found in TestMountBackground.
2018-04-07tests: matrix: check for fd leaksJakob Unterwurzacher
And fix two in test_helpers.Mount(). Leftover fds can cause an unmount failure like this later: fusermount: failed to unmount /tmp/gocryptfs-test-parent/873632270/default-plain: Device or resource busy so try to catch them early.