summaryrefslogtreecommitdiff
path: root/mount.go
AgeCommit message (Collapse)Author
2021-06-20main: use JSONDump helper for debug outputJakob Unterwurzacher
2021-05-18fsck: redirect go-fuse noise to syslogJakob Unterwurzacher
2021-05-15Add -acl flag to enable ACL enforcementJakob Unterwurzacher
With test to verify that it actually works this time: Run "make root_test". Depends-on: https://github.com/rfjakob/gocryptfs/issues/536 Fixes: https://github.com/rfjakob/gocryptfs/issues/536
2021-04-05fusefrontend: print dirCache stats after unmountJakob Unterwurzacher
2021-03-07v2api: -sharestorage: disable hard link tracking & add testsJakob Unterwurzacher
Hard link tracking was not correctly disabled since the migration to the go-fuse v2 api. Add a test to ensure it stays off. Fixes https://github.com/rfjakob/gocryptfs/issues/525
2021-01-02-idle: don't lazy-unmountJakob Unterwurzacher
When a process has its working dir inside the mount, the only way we notice is that we get EBUSY when trying to unmount. We used to lazy-unmount in this case, but this means pulling the rug from under the process. For example, bash will start throwing cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory messages. Fixes https://github.com/rfjakob/gocryptfs/issues/533
2020-12-20main: add "-kernel_cache" flaggmd20
This option is similar to fuse(8) kernel_cache Verified using vmtouch. Without -kernel_cache: $ dd if=/dev/zero of=foo bs=1M count=10 ; vmtouch -t foo ; vmtouch foo 10+0 records in 10+0 records out 10485760 bytes (10 MB, 10 MiB) copied, 0,0242321 s, 433 MB/s Files: 1 Directories: 0 Touched Pages: 2560 (10M) Elapsed: 0.011159 seconds Files: 1 Directories: 0 Resident Pages: 0/2560 0/10M 0% Elapsed: 0.000993 seconds With -kernel_cache: $ dd if=/dev/zero of=foo bs=1M count=10 ; vmtouch -t foo ; vmtouch foo 10+0 records in 10+0 records out 10485760 bytes (10 MB, 10 MiB) copied, 0,0244015 s, 430 MB/s Files: 1 Directories: 0 Touched Pages: 2560 (10M) Elapsed: 0.011564 seconds Files: 1 Directories: 0 Resident Pages: 2560/2560 10M/10M 100% Elapsed: 0.000369 seconds
2020-10-18fusefronted: reject GETXATTR "security.capability"Jakob Unterwurzacher
Unless we are mounted with -suid, we can reject these requests, and gain back some lost speed. Closes https://github.com/rfjakob/gocryptfs/issues/515
2020-10-14main: show microseconds in go-fuse logsJakob Unterwurzacher
Suppress the date but show microseconds in fuse debug logs (-fusedebug) and go-fuse warnings.
2020-07-27v2api: pass fusedebug option via MountOptionsJakob Unterwurzacher
srv.SetDebug() is deprecated and only enables the debug output after the init sequence, so we missed the first few transaction in the debug output.
2020-07-19v2api: fsck: use a temporary mountJakob Unterwurzacher
Directly accessing the Nodes does not work properly, as there is no way to attach a newly LOOKUPped Node to the tree. This means Path() does not work. Use an actual mount instead and walk the tree.
2020-07-19v2api: enable go-fuse warnings on mount & fsckJakob Unterwurzacher
2020-07-18v2api: make fsck compile againJakob Unterwurzacher
Horribly broken, but it compiles. .../tests/fsck$ ./run_fsck.bash Reading password from extpass program "echo", arguments: ["test"] Decrypting master key OpenDir ".": invalid entry "invalid_file_name.3": illegal base64 data at input byte 17 OpenDir ".": invalid entry "invalid_file_name_2": bad message fsck: corrupt entry in dir "": "invalid_file_name.3" fsck: corrupt entry in dir "": "invalid_file_name_2" OpenDir ".": invalid entry "invalid_file_name____1": bad message fsck: corrupt entry in dir "": "invalid_file_name____1" fsck: error stating file ".go-fuse.5577006791947779410/deleted": no such file or directory fsck: error listing xattrs on ".go-fuse.13260572831089785859/deleted": no such file or directory fsck: error opening dir "i10488239 (dir): ": no such file or directory fsck: error reading symlink ".go-fuse.10667007354186551956/deleted": no such file or directory fsck: error listing xattrs on ".go-fuse.11998794077335055257/deleted": no such file or directory [...]
2020-07-12v2api: set NullPermissions = trueJakob Unterwurzacher
Don't let go-fuse mess úp 0000 permissions.
2020-07-08v2api: fix crash on umountJakob Unterwurzacher
fs.Mount already called srv.Serve() for us.
2020-06-21v2api (go-fuse v2 api): initial noop implementationJakob Unterwurzacher
Compiles and mounts but does nothing useful.
2020-05-17Update go-fuse import path to github.com/hanwen/go-fuse/v2Jakob Unterwurzacher
We need https://github.com/hanwen/go-fuse/commit/fd7328faf9fdf75709f7ba7df7072aaf4eeb18b3 to fix a crash reported in https://github.com/rfjakob/gocryptfs/issues/430 : 2019/10/30 17:14:16 Unknown opcode 2016 panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 addr=0x20 pc=0x508d38] This patch is only in the v2.x.x branch. Upgrade to v2, as the old API is also supported there. Running git grep hanwen/go-fuse | grep -v hanwen/go-fuse/v2 to check for forgotten references comes back clean.
2020-05-09ctlsock: create exported ctlsock client libraryJakob Unterwurzacher
The former interal ctlsock server package is renamed to ctlsocksrv.
2020-05-09main: untangle `-masterkey` handling and config loadingJakob Unterwurzacher
This was handled both in getMasterKey(). Split it apart.
2020-02-28Show undecryptable filenames if they match supplied globorcas
Resolves https://github.com/rfjakob/gocryptfs/issues/393
2020-01-14main: haveFusermount2: respect PATH environment variableJakob Unterwurzacher
Use exec.LookPath() to find fusermount in the user's PATH first. Fall back to /bin/fusermount for the case that PATH is not set, like go-fuse does. Fixes https://github.com/rfjakob/gocryptfs/issues/448
2019-12-28main: detect fusermount3 and don't add `nonempty`Jakob Unterwurzacher
fusermount3 (i.e. fusermount from libfuse 3.x) has dropped the `nonempty` option. Detect fusermount3 and don't add `nonempty` in this case. Fixes https://github.com/rfjakob/gocryptfs/pull/440
2019-09-08Fix -idle unmounting despite activityJakob Unterwurzacher
Fixes https://github.com/rfjakob/gocryptfs/issues/421
2019-08-04Fix "constant 2435016766 overflows int32" build failure on armJakob Unterwurzacher
Cast to uint32 to fix the int32 overflow, and define BTRFS_SUPER_MAGIC locally to fix the next failure on darwin.
2019-08-04Rename isDirEmpty -> isEmptyDirJakob Unterwurzacher
The function actually answers the question: "is this an empty dir"?
2019-08-04Force -noprealloc on BtrfsJakob Unterwurzacher
Preallocation on Btrfs is broken ( https://github.com/rfjakob/gocryptfs/issues/395 , https://lore.kernel.org/linux-btrfs/CAPv9Zmk46As_P9Gyf_icET53xRda63h7iC1meES9xbdDEt9qow@mail.gmail.com/ ) and slow ( https://github.com/rfjakob/gocryptfs/issues/63 ).
2019-03-26reverse mode: support wildcard exclude (--exclude-wildcard)Eduardo M KALINOWSKI
This adds support for gitignore-like wildcards and exclude patters in reverse mode. It (somewhat) fixes #273: no regexp support, but the syntax should be powerful enough to satisfy most needs. Also, since adding a lot of --exclude options can be tedious, it adds the --exclude-from option to read patterns from a file (or files).
2019-01-15mount: Replace commas in volume name.Sebastian Lackner
Fixes the following test failure: cli_test.go:534: Failed to mount "[...]/542399800,foo,bar" on "[...]/542399800,foo,bar.mnt": exit status 19
2018-10-17main: also redirect Fatal logger to syslog on daemonizationJakob Unterwurzacher
The messages would still be collected via gocryptfs-logger, but let's do it right. Before: Oct 17 21:58:12 brikett gocryptfs[9926]: testing info Oct 17 21:58:12 brikett gocryptfs[9926]: testing warn Oct 17 21:58:12 brikett gocryptfs-9926-logger[9935]: testing fatal After: Oct 17 22:00:53 brikett gocryptfs[10314]: testing info Oct 17 22:00:53 brikett gocryptfs[10314]: testing warn Oct 17 22:00:53 brikett gocryptfs[10314]: testing fatal
2018-10-11Add option for autounmountJesse Dunietz
Even though filesystem notifications aren't implemented for FUSE, I decided to try my hand at implementing the autounmount feature (#128). I based it on the EncFS autounmount code, which records filesystem accesses and checks every X seconds whether it's idled long enough to unmount. I've tested the feature locally, but I haven't added any tests for this flag. I also haven't worked with Go before. So please let me know if there's anything that should be done differently. One particular concern: I worked from the assumption that the open files table is unique per-filesystem. If that's not true, I'll need to add an open file count and associated lock to the Filesystem type instead. https://github.com/rfjakob/gocryptfs/pull/265
2018-09-18main: sanitize commas from fsnameJakob Unterwurzacher
The cipherdir path is used as the fsname, as displayed in "df -T". Now, having a comma in fsname triggers a sanity check in go-fuse, aborting the mount with: /bin/fusermount: mount failed: Invalid argument fuse.NewServer failed: fusermount exited with code 256 Sanitize fsname by replacing any commas with underscores. https://github.com/rfjakob/gocryptfs/issues/262
2018-09-08main: don't read the config file twice (fix pipe bug)Jakob Unterwurzacher
Instead, first Load() the file, then DecryptMasterKey(). Fixes https://github.com/rfjakob/gocryptfs/issues/258
2018-08-11reverse mode: add --exclude optionJakob Unterwurzacher
https://github.com/rfjakob/gocryptfs/issues/235
2018-07-01main: improve fuse.NewServer error messageJakob Unterwurzacher
Before: fuse.NewServer failed: "fusermount exited with code 256\n" After: fuse.NewServer failed: fusermount exited with code 256
2018-06-07main: accept -dev, -nodev, -suid, -nosuid, -exec, -noexecJakob Unterwurzacher
When mounted via /etc/fstab like this, /a /b fuse.gocryptfs default 0 0 we always get extra options passed. As reported by @mahkoh at https://github.com/rfjakob/gocryptfs/pull/233 : mount passes `-o noexec` if `-o user` is set and `-o exec` is not set. If both `-o user` and `-o exec` are set, it passes `-o exec`. Make these options work, and in addtion, also make -suid and -rw work the same way. Reported-by: @mahkoh
2018-04-08Fix the easy golint warningsJakob Unterwurzacher
Reported by https://goreportcard.com/report/github.com/rfjakob/gocryptfs
2018-04-01main: move getMasterKey into initFuseFrontendJakob Unterwurzacher
This is where the results are used, so call it there. This simplifies doMount a bit because we can get rid of the block protecting masterkey.
2018-04-01main: move masterkey logic into new helper getMasterKeyJakob Unterwurzacher
The new helper will also be used by fsck.
2018-04-01main: move and rename checkDir*() helperJakob Unterwurzacher
To avoid confusion with fsck, rename to isDir*() and move the functions into init_dir.go.
2018-03-22Add `-masterkey=stdin` functionalityJakob Unterwurzacher
https://github.com/rfjakob/gocryptfs/issues/218
2018-02-28tlog: stop embedding log.Logger to prevent mistakesJakob Unterwurzacher
A few places have called tlog.Warn.Print, which directly calls into log.Logger due to embedding, losing all features of tlog. Stop embedding log.Logger to make sure the internal functions cannot be called accidentially and fix (several!) instances that did.
2018-02-18main: doMount: use a deferred function for wipeKeysJakob Unterwurzacher
Also drop the unused int return.
2018-02-18main: overwrite keys and let them run out of scopeJakob Unterwurzacher
As soon as we don't need them anymore, overwrite keys with zeros. Make sure they run out of scope so we don't create a risk of inadvertedly using all-zero keys for encryption. https://github.com/rfjakob/gocryptfs/issues/211
2018-02-18main: try to wipe cryptocore's secret keys on unmountJakob Unterwurzacher
Raise the bar for recovering keys from memory. https://github.com/rfjakob/gocryptfs/issues/211
2018-02-18fusefrontend[_reverse]: move crypto init up to callerJakob Unterwurzacher
Both fusefrontend and fusefrontend_reverse were doing essentially the same thing, move it into main's initFuseFrontend. A side-effect is that we have a reference to cryptocore in main, which will help with wiping the keys on exit (https://github.com/rfjakob/gocryptfs/issues/211).
2018-01-20MacOS: rely on OSXFuse to create the mountpointJakob Unterwurzacher
As reported in https://github.com/rfjakob/gocryptfs/issues/194 , OSXFuse creates the mountpoint if it does not exist.
2018-01-16MacOS: rely on OSXFuse to create mountpoint below /VolumesJakob Unterwurzacher
OSXFuse automatically creates the mountpoint if it is below /Volumes because this would require root permissions which the user might not have. Reported at https://github.com/rfjakob/gocryptfs/issues/194
2017-11-12main: add "-sharedstorage" flagJakob Unterwurzacher
At the moment, it does two things: 1. Disable stat() caching so changes to the backing storage show up immediately. 2. Disable hard link tracking, as the inode numbers on the backing storage are not stable when files are deleted and re-created behind our back. This would otherwise produce strange "file does not exist" and other errors. Mitigates https://github.com/rfjakob/gocryptfs/issues/156
2017-10-31main: disallow recursively encrypting ourselvesJakob Unterwurzacher
From https://github.com/rfjakob/gocryptfs/issues/150: mkdir a mkdir a/b gocryptsfs -init -reverse a/ gocryptfs -reverse a/ a/b Now directory a/b/ contains encrypted view of 'a' but it is possible to descend into encrypted version of b (e.g. a/b/43873uhj538765387/) which contains double encrypted 'a' and so on. Reported-by: https://github.com/tigmac
2017-10-22reverse mode: disable ClientInodes (hard link tracking)Jakob Unterwurzacher
Disable hard link tracking to avoid strange breakage on duplicate inode numbers ( https://github.com/rfjakob/gocryptfs/issues/149 ). Reverse mode is read-only, so we don't need a working link().