summaryrefslogtreecommitdiff
path: root/internal
AgeCommit message (Collapse)Author
2019-01-04fusefrontend: upgrade to three-entry dirCachev1.7-rc1Jakob Unterwurzacher
3 entries should work well for up to three parallel users. It works well for extractloop.bash (two parallel tar extracts).
2019-01-04fusefrontend_reverse: Fix redeclaration of 'entries' variable.Sebastian Lackner
Go version go1.10.7 linux/amd64 complains with: internal/fusefrontend_reverse/rfs.go:333: declaration of "entries" shadows declaration at internal/fusefrontend_reverse/rfs.go:327
2019-01-04reverse mode: -exclude: filter out excluded .name filesJakob Unterwurzacher
Fixes https://github.com/rfjakob/gocryptfs/issues/286 : While the actual file is properly excluded, the * .name file is still leaked in the directory listing: ``` drwxr-xr-x 2 sebastian sebastian 4,0K Dez 17 14:58 . drwxr-xr-x 7 sebastian sebastian 4,0K Dez 17 14:45 .. -r-------- 1 sebastian sebastian 408 Dez 17 14:56 gocryptfs.conf -r--r--r-- 1 sebastian sebastian 16 Dez 17 14:58 gocryptfs.diriv -r--r--r-- 1 sebastian sebastian 320 Dez 17 14:58 gocryptfs.longname.3vZ_r3eDPb1_fL3j5VA4rd_bcKWLKT9eaxOVIGK5HFA.name ```
2019-01-04reverse mode: fix "-exclude" in "-plaintextnames" dir listingsJakob Unterwurzacher
Excluded files showed up in directory listing like this: drwxr-xr-x 2 sebastian sebastian 4,0K Dez 17 14:48 . drwxr-xr-x 7 sebastian sebastian 4,0K Dez 17 14:45 .. -????????? ? ? ? ? ? abcd -r-------- 1 sebastian sebastian 366 Dez 17 14:45 gocryptfs.conf Fixes https://github.com/rfjakob/gocryptfs/issues/285
2019-01-04fusefrontend: Allow to create sparse file of size 4096.Sebastian Lackner
When the old size is zero, there are no existing blocks to merge the new data with. Directly use Ftruncate if the size is block-aligned. Fixes https://github.com/rfjakob/gocryptfs/issues/305
2019-01-04A few more spelling fixes.Sebastian Lackner
Found with the 'codespell' utility.
2019-01-03Omit syscall.O_RDONLY flag when passing O_PATH.Sebastian Lackner
When O_PATH is specified in flags, flag bits other than O_CLOEXEC, O_DIRECTORY, and O_NOFOLLOW are ignored.
2019-01-03fusefrontend: Use appropriate flags in decryptPathAt.Sebastian Lackner
2019-01-03fusefrontend: Open directory with syscall.O_DIRECTORY in OpenDir.Sebastian Lackner
2019-01-03fusefrontend: Open directory with syscall.O_DIRECTORY in Rmdir.Sebastian Lackner
2019-01-03fusefrontend: Do not Clear cache at end of Rmdir function.Sebastian Lackner
We already do 'defer fs.dirCache.Clear()', so this is no longer required.
2019-01-03nametransform: Add implicit syscall.O_RDONLY flag.Sebastian Lackner
2019-01-03syscallcompat: Use O_PATH to open base directory.Sebastian Lackner
Also remove some unnecessary flags: When O_PATH is specified in flags, flag bits other than O_CLOEXEC, O_DIRECTORY, and O_NOFOLLOW are ignored.
2019-01-03fusefrontend: Remove debug code.Sebastian Lackner
This code was accidentially added in 4f66d66755da63c78b09201c6c72353009251cf2.
2019-01-03fusefronted: dirCache: fix bug handling ""Jakob Unterwurzacher
Bug looked like this: $ ls -l . total 0 drwxrwxr-x. 2 jakob jakob 60 Jan 3 15:42 foo -rw-rw-r--. 1 jakob jakob 0 Jan 3 15:46 x $ ls -l . ls: cannot access '.': No such file or directory (only happened when "" was in the dirCache)
2019-01-03fusefrontend: add dirCacheJakob Unterwurzacher
2019-01-03nametransform: simplify WriteDirIV to WriteDirIVAtJakob Unterwurzacher
Un-spaghettify the function and let the callers open the directory.
2019-01-02fusefrontend: use O_RDONLY in the ListXAttr fallback pathJakob Unterwurzacher
Copy-paste error. https://github.com/rfjakob/gocryptfs/issues/308
2019-01-02fusefrontend: move openBackingDir into its own fileJakob Unterwurzacher
This function is in all fastpaths, will get a cache, and needs its own file. renamed: internal/fusefrontend/names.go -> internal/fusefrontend/openbackingdir.go renamed: internal/fusefrontend/names_test.go -> internal/fusefrontend/openbackingdir_test.go
2019-01-02fusefronted: make EncryptPath symlink-safeJakob Unterwurzacher
Finally allows us to delete EncryptPathDirIV.
2019-01-02fusefrontend: xattr: fix operations on files without read permissionsJakob Unterwurzacher
* listxattr is fixed via the /proc/self/fd trick * setxattr,removexattr are fixed by opening the file O_WRONLY Fixes https://github.com/rfjakob/gocryptfs/issues/308
2019-01-02fusefrontend: don't downgrade type needlesslyJakob Unterwurzacher
2019-01-02fusefrontend: use Fsetxattr/Fgetxattr/etc on all platformsJakob Unterwurzacher
Darwin now also has these functions, use them. Simplifies the code and makes it symlink-safe on Darwin as well.
2019-01-02syscallcompat: add Fgetxattr / Fsetxattr wrappersJakob Unterwurzacher
These take care of buffer sizing and parsing.
2019-01-02fusefrontend: openBackingDir: fix fd leak in error pathJakob Unterwurzacher
Reported by @slackner at https://github.com/rfjakob/gocryptfs/commit/932efbd4593fe6be6c86f0dafeaea32910b7c246#r31813373 thanks!
2019-01-02nametransform: fix possible incomplete read in ReadLongNameAtJakob Unterwurzacher
Pread() needs retry logic, so instead of implementing it ourselves, use os.File. Reported by @slackner at https://github.com/rfjakob/gocryptfs/commit/c09bf1f2284706232642431c75fa1f3d8500a9d0#r31813394
2019-01-01fusefrontend: fix fd leak in error pathJakob Unterwurzacher
2019-01-01fusefrontend: fix fd leak in Access()Jakob Unterwurzacher
Thanks @slackner! Fixes https://github.com/rfjakob/gocryptfs/issues/306
2019-01-01fusefrontend: xattr: fix hang on FIFOsJakob Unterwurzacher
An Open() a fifo blocks until it is opened for writing. This meant that xattr operations on FIFOs would block. Pass O_NONBLOCK to fix that, and add a test.
2019-01-01fusefrontend: only compile getBackingPath() on DarwinJakob Unterwurzacher
This function is NOT symlink-safe. Darwin needs it because it lacks fgetxattr(2) and friends.
2019-01-01fusefrontend: make ListXAttr symlink-safe on LinuxJakob Unterwurzacher
Uses /proc/self/fd.
2019-01-01fusefrontend: make RemoveXAttr() symlink-safeJakob Unterwurzacher
Uses /proc/self/fd on Linux.
2019-01-01fusefrontend: make SetXAttr() symlink-safe on LinuxJakob Unterwurzacher
Uses the /proc/self/fd trick.
2019-01-01fusefrontend: make GetXAttr() symlink-safe on LinuxJakob Unterwurzacher
Uses the /proc/self/fd trick, which does not work on Darwin.
2019-01-01fusefrontend: make Utimens symlink-safeJakob Unterwurzacher
unix.UtimesNanoAt now also exists on Darwin, yay!
2019-01-01fusefrontend: fix compile failure on DarwinJakob Unterwurzacher
Failure was: + GOOS=darwin + GOARCH=amd64 + go build -tags without_openssl # github.com/rfjakob/gocryptfs/internal/fusefrontend internal/fusefrontend/fs_dir.go:159:60: cannot use origMode | 448 (type uint16) as type uint32 in argument to syscallcompat.Fchmodat internal/fusefrontend/fs_dir.go:170:33: cannot use origMode (type uint16) as type uint32 in argument to syscallcompat.Fchmodat
2019-01-01fusefrontend: mark Truncate, Unlink, Symlink symlink-safeJakob Unterwurzacher
No changes needed.
2019-01-01fusefrontend: make Rmdir symlink-safeJakob Unterwurzacher
Now uses Unlinkat.
2019-01-01nametransform: rename WriteLongName() -> WriteLongNameAt()Jakob Unterwurzacher
And also rename DeleteLongName() -> DeleteLongNameAt(). The naming follow the names open the openat() etc syscalls.
2019-01-01fusefrontend: make Readlink() symlink-safeJakob Unterwurzacher
Now symlink-safe through Readlinkat().
2019-01-01fusefrontend: make OpenDir() symlink-safeJakob Unterwurzacher
Interestingly, little or no performance impact: $ ./benchmark.bash Testing gocryptfs at /tmp/benchmark.bash.39W: gocryptfs v1.6-42-g30c2349-dirty; go-fuse v20170619-66-g6df8ddc; 2018-11-04 go1.11 Downloading linux-3.0.tar.gz /tmp/linux-3.0.tar.gz 100%[=========================================================================>] 92.20M 2.93MB/s in 31s 2018-11-04 21:44:44 URL:https://cdn.kernel.org/pub/linux/kernel/v3.0/linux-3.0.tar.gz [96675825/96675825] -> "/tmp/linux-3.0.tar.gz" [1] WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.1808 s, 222 MB/s READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.866438 s, 303 MB/s UNTAR: 24.745 MD5: 12.050 LS: 3.525 RM: 9.544 Note: kernel has been updated: $ uname -a Linux brikett 4.18.16-200.fc28.x86_64 #1 SMP Sat Oct 20 23:53:47 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
2019-01-01fusefrontend: mark a few more functions as symlink-safe / unsafeJakob Unterwurzacher
2019-01-01fusefrontend: use openBackingDir in ctlsock interfaceJakob Unterwurzacher
Instead of calling syscall.Open() ourselves, rely on openBackingDir().
2019-01-01fusefrontend: make GetAttr() symlink-safeJakob Unterwurzacher
Use openBackingDir() and Fstatat(). High performance impact, though part of it should be mitigated by adding DirIV caching to the new code paths. $ ./benchmark.bash Testing gocryptfs at /tmp/benchmark.bash.Eou: gocryptfs v1.6-37-ge3914b3-dirty; go-fuse v20170619-66-g6df8ddc; 2018-10-14 go1.11 WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.2289 s, 213 MB/s READ: 262144000 bytes (262 MB, 250 MiB) copied, 1.02616 s, 255 MB/s UNTAR: 24.490 MD5: 13.120 LS: 3.368 RM: 9.232
2019-01-01fusefrontend: make openBackingDir() symlink-safeJakob Unterwurzacher
openBackingDir() used encryptPath(), which is not symlink-safe itself. Drop encryptPath() and implement our own directory walk. Adds three seconds to untar and two seconds to rm: $ ./benchmark.bash Testing gocryptfs at /tmp/benchmark.bash.MzG: gocryptfs v1.6-36-g8fb3c2f-dirty; go-fuse v20170619-66-g6df8ddc; 2018-10-14 go1.11 WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.25078 s, 210 MB/s READ: 262144000 bytes (262 MB, 250 MiB) copied, 1.0318 s, 254 MB/s UNTAR: 20.941 MD5: 11.568 LS: 1.638 RM: 5.337
2019-01-01fusefrontend: mark symlink-safe FUSE callsJakob Unterwurzacher
Document which FUSE calls are already symlink-safe in the function comment.
2019-01-01fusefrontend: make DecryptPath() symlink-safeJakob Unterwurzacher
DecryptPath is now symlink-safe through the use of *at() functions.
2019-01-01fusefrontend: make Access() symlink-safe.Jakob Unterwurzacher
Make Access() symlink-safe through use of faccessat.
2019-01-01nametransform: comments: directly link to ioutil.WriteFile fixJakob Unterwurzacher
So the reader does not have to read through the whole ticket. The commit message has a nice summary of the problem.
2019-01-01fusefrontend: Fix debug message in doWrite() method.Sebastian Lackner
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-01 12:46:18 +0000