aboutsummaryrefslogtreecommitdiff
path: root/internal
AgeCommit message (Collapse)Author
2017-05-07exitcodes: pull all exit code definitions into the packageJakob Unterwurzacher
This commit defines all exit codes in one place in the exitcodes package. Also, it adds a test to verify the exit code on incorrect password, which is what SiriKali cares about the most. Fixes https://github.com/rfjakob/gocryptfs/issues/77 .
2017-05-07fusefrontend: implement path decryption via ctlsockJakob Unterwurzacher
Closes https://github.com/rfjakob/gocryptfs/issues/84 .
2017-05-07nametranform, fusefrontend: better errors on invalid namesJakob Unterwurzacher
nametransform.DecryptName() now always returns syscall.EBADMSG if the name was invalid. fusefrontend.OpenDir error messages have been normalized.
2017-05-07Fix typos found by MisspellJakob Unterwurzacher
Misspell Finds commonly misspelled English words gocryptfs/internal/configfile/scrypt.go Line 41: warning: "paramter" is a misspelling of "parameter" (misspell) gocryptfs/internal/ctlsock/ctlsock_serve.go Line 1: warning: "implementes" is a misspelling of "implements" (misspell) gocryptfs/tests/test_helpers/helpers.go Line 27: warning: "compatability" is a misspelling of "compatibility" (misspell)
2017-05-03fusefrontend: log "too many open files" errorsJakob Unterwurzacher
This usually indicates that the open file limit for gocryptfs is too low. We should report this to the user.
2017-05-01openfiletable: rename WriteLock to ContentLockJakob Unterwurzacher
...and IDLock to HeaderLock. This matches what the locks actually protect.
2017-05-01fusefrontend: rely on nodefs.defaultFile for no-op functionsJakob Unterwurzacher
Now that we embed nodefs.NewDefaultFile(), we can drop our own no-ops.
2017-05-01contentenc: downgrade "interrupted write?" warning to debugJakob Unterwurzacher
This can happen during normal operation, and is harmless since 14038a1644f17f50b113a05d09a2a0a3b3e973b2 "fusefrontend: readFileID: reject files that consist only of a header" causes dormant header-only files to be rewritten on the next write.
2017-05-01fusefrontend: drop writeOnly flagJakob Unterwurzacher
We do not have to track the writeOnly status because the kernel will not forward read requests on a write-only FD to us anyway. I have verified this behavoir manually on a 4.10.8 kernel and also added a testcase.
2017-05-01fusefronted, openfiletable: move the open file table to its own packageJakob Unterwurzacher
The open file table code needs some room to grow for the upcoming FD multiplexing implementation.
2017-04-29fusefrontend: rename write_lock.go -> open_file_table.goJakob Unterwurzacher
The data structure was originally called write lock table, but is now simply called the open file table. Rename the file to reflect that.
2017-04-29fusefronted: drop unused file.String() functionJakob Unterwurzacher
This is a very old leftover.
2017-04-29readpassword: increase max password size to 2048Jakob Unterwurzacher
This is the value EncFS uses, so let's follow suit. Suggested at https://github.com/rfjakob/gocryptfs/issues/77 .
2017-04-29fix golint complaintsJakob Unterwurzacher
2017-04-29nametransform: WriteDirIV: replace ioutil.WriteFileJakob Unterwurzacher
As reported at https://github.com/rfjakob/gocryptfs/issues/105 , the "ioutil.WriteFile(file, iv, 0400)" call causes "permissions denied" errors on an NFSv4 setup. "strace"ing diriv creation and gocryptfs.conf creation shows this: conf (works on the user's NFSv4 mount): openat(AT_FDCWD, "/tmp/a/gocryptfs.conf.tmp", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0400) = 3 diriv (fails): openat(AT_FDCWD, "/tmp/a/gocryptfs.diriv", O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0400) = 3 This patch creates the diriv file with the same flags that are used for creating the conf: openat(AT_FDCWD, "/tmp/a/gocryptfs.diriv", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0400) = 3 Closes https://github.com/rfjakob/gocryptfs/issues/105
2017-04-24forcedecode: tighten checksJakob Unterwurzacher
...and fix a few golint issues and print a scary warning message on mount. Also, force the fs to ro,noexec.
2017-04-23Add -forcedecodedanim7
Force decode of encrypted files even if the integrity check fails, instead of failing with an IO error. Warning messages are still printed to syslog if corrupted files are encountered. It can be useful to recover files from disks with bad sectors or other corrupted media. Closes https://github.com/rfjakob/gocryptfs/pull/102 .
2017-04-23Fix Flock build breakageJakob Unterwurzacher
go-fuse has added a new method to the nodefs.File interface that caused this build error: internal/fusefrontend/file.go:75: cannot use file literal (type *file) as type nodefs.File in return argument: *file does not implement nodefs.File (missing Flock method) Fixes https://github.com/rfjakob/gocryptfs/issues/104 and prevents the problem from happening again.
2017-04-01fusefrontend_reverse: switch to stable inode numbersJakob Unterwurzacher
The volatile inode numbers that we used before cause "find" to complain and error out. Virtual inode numbers are derived from their parent file inode number by adding 10^19, which is hopefully large enough no never cause problems in practice. If the backing directory contains inode numbers higher than that, stat() on these files will return EOVERFLOW. Example directory lising after this change: $ ls -i 926473 gocryptfs.conf 1000000000000926466 gocryptfs.diriv 944878 gocryptfs.longname.hmZojMqC6ns47eyVxLlH2ailKjN9bxfosi3C-FR8mjA 1000000000000944878 gocryptfs.longname.hmZojMqC6ns47eyVxLlH2ailKjN9bxfosi3C-FR8mjA.name 934408 Tdfbf02CKsTaGVYnAsSypA
2017-04-01fusefrontend_reverse: drop unused dirIVAttr functionJakob Unterwurzacher
This has long been replaced by virtualFile.GetAttr().
2017-04-01fusefrontend_reverse: convert fmt.Printf calls to tlogJakob Unterwurzacher
The fmt.Printfs output would end up in the paniclog.
2017-04-01fusefrontend_reverse: add comment to newVirtualFileJakob Unterwurzacher
...and improve and comment variable naming in findLongnameParent. No semantic changes.
2017-03-28fusefrontend_reverse: consistent file owners for .diriv, .name filesdanim7
This PR addresses the Issue #95, about "Confusing file owner for longname files in reverse mode". It affects only the reverse mode, and introduces two modifications: 1) The "gocryptfs.longname.XXXX.name" files are assigned the owner and group of the underlying plaintext file. Therefore it is consistent with the file "gocryptfs.longname.XXXX" that has the encrypted contents of the plaintext file. 2) The two virtual files mentioned above are given -r--r--r-- permissions. This is consistent with the behavior described in function Access in internal/fusefrontend_reverse/rfs.go where all virtual files are always readable. Behavior also observed in point c) in #95 . Issue #95 URL: https://github.com/rfjakob/gocryptfs/issues/95 Pull request URL: https://github.com/rfjakob/gocryptfs/pull/97
2017-03-25configfile: always validate all scrypt parametersJakob Unterwurzacher
This makes sure we cannot get weak parameters passed through a rougue gocryptfs.conf.
2017-03-20readpassword: increase max password length to 2000Jakob Unterwurzacher
1000 was too low as at least one user had a password that was longer. Fixes https://github.com/rfjakob/gocryptfs/issues/93
2017-03-18fusefrontend: get rid of leftover debug outputJakob Unterwurzacher
2017-03-18serialize_reads: add read serialization logicJakob Unterwurzacher
Due to kernel readahead, we usually get multiple read requests at the same time. These get submitted to the backing storage in random order, which is a problem if seeking is very expensive. Details: https://github.com/rfjakob/gocryptfs/issues/92
2017-03-12fusefrontend: readFileID: reject files that consist only of a headerJakob Unterwurzacher
A header-only file will be considered empty (this is not supposed to happen). This makes File ID poisoning more difficult.
2017-03-12fusefrontend: truncateGrowFile: avoid createHeader() callJakob Unterwurzacher
...if doWrite() can do it for us. This avoids the situation that the file only consists of a file header when calling doWrite. A later patch will check for this condition and warn about it, as with this change it should no longer occour in normal operation.
2017-03-07configfile: HKDF feature flag should also be set for "-plaintextnames"Jakob Unterwurzacher
2017-03-07contentenc: catch integer underflow in file size calculationJakob Unterwurzacher
If you truncate a ciphertext file to 19 bytes, you could get the impression that the plaintext is 18446744073709551585 bytes long, as reported by "ls -l". Fix it by clamping the value to zero.
2017-03-07configfile: enable HKDF and Raw64 feature flags by defaultJakob Unterwurzacher
Also adds a test to verify that they are set in new config files.
2017-03-07Report correct symbolic link dentry sizesM. Vefa Bicakci
Prior to this commit, gocryptfs's reverse mode did not report correct directory entry sizes for symbolic links, where the dentry size needs to be the same as the length of a string containing the target path. This commit corrects this issue and adds a test case to verify the correctness of the implementation. This issue was discovered during the use of a strict file copying program on a reverse-mounted gocryptfs file system.
2017-03-05tests: configfile: fix spurious test failure IIJakob Unterwurzacher
internal/configfile/config_test.go:67: c declared and not used
2017-03-05tests: configfile: fix spurious test failureJakob Unterwurzacher
This test fails because Raw64 has been disabled for now.
2017-03-05configfile: disable Raw64 for nowJakob Unterwurzacher
Raw64 is supported (but was disabled by default) since gocryptfs v1.2. However, the implementation was buggy because it forgot about long names and symlinks. Disable it for now by default and enable it later, together with HKDF.
2017-03-05nametransform: fix Raw64 not affecting symlink targetsJakob Unterwurzacher
The symlink functions incorrectly hardcoded the padded base64 variant.
2017-03-05nametransform: fix Raw64 not affecting longnamesJakob Unterwurzacher
HashLongName() incorrectly hardcoded the call to base64.URLEncoding.
2017-03-05full stack: implement HKDF supportJakob Unterwurzacher
...but keep it disabled by default for new filesystems. We are still missing an example filesystem and CLI arguments to explicitely enable and disable it.
2017-03-05configfile: reject the "HKDF" flag for nowJakob Unterwurzacher
This will be re-enabled once it is implemented.
2017-03-05configfile: switch on Raw64 by defaultJakob Unterwurzacher
As we have dropped Go 1.4 compatibility already, and will add a new feature flag for gocryptfs v1.3 anyway, this is a good time to enable Raw64 as well.
2017-03-05configfile: switch to 128-bit IVs for master key encryptionJakob Unterwurzacher
There is no security reason for doing this, but it will allow to consolidate the code once we drop compatibility with gocryptfs v1.2 (and earlier) filesystems.
2017-03-05Drop Go 1.4 compatability code everywhereJakob Unterwurzacher
Yields a nice reduction in code size.
2017-03-05cryptocore: rename "BackendTypeEnum" -> "AEADTypeEnum"Jakob Unterwurzacher
There are two independent backends, one for name encryption, the other one, AEAD, for file content. "BackendTypeEnum" only applies to AEAD (file content), so make that clear in the name.
2017-03-05cryptocore: use eme v1.1 interfaceJakob Unterwurzacher
Version 1.1 of the EME package (github.com/rfjakob/eme) added a more convenient interface. Use it. Note that you have to upgrade your EME package (go get -u)!
2017-03-05configfile: define HKDF flagJakob Unterwurzacher
2017-03-02fusefrontend: when chown'ing a directory, also chown its dirivJakob Unterwurzacher
When filename encryption is active, every directory contains a "gocryptfs.diriv" file. This file should also change the owner. Fixes https://github.com/rfjakob/gocryptfs/issues/86
2017-02-26exitcodes: define code 12 for "password incorrect"Jakob Unterwurzacher
2017-02-25configfile: rename "kdf.go" -> "scrypt.go"Jakob Unterwurzacher
This really only handles scrypt and no other key-derivation functions. Renaming the files prevents confusion once we introduce HKDF. renamed: internal/configfile/kdf.go -> internal/configfile/scrypt.go renamed: internal/configfile/kdf_test.go -> internal/configfile/scrypt_test.go
2017-02-24stupidgcm: drop only external dependecyJakob Unterwurzacher
This makes it easier to use the package in external projects. See https://github.com/rfjakob/gocryptfs/issues/79