| Age | Commit message (Collapse) | Author |
|---|
|
Due to RMW, we always need read permissions on the backing file. This is a
problem if the file permissions do not allow reading (i.e. 0200 permissions).
This patch works around that problem by chmod'ing the file, obtaining a fd,
and chmod'ing it back.
Test included.
Issue reported at: https://github.com/rfjakob/gocryptfs/issues/125
|
|
Saves 3% for the tar extract benchmark because we skip the allocation.
|
|
Previously we ran through the decryption steps even for an empty
ciphertext slice. The functions handle it correctly, but returning
early skips all the extra calls.
Speeds up the tar extract benchmark by about 4%.
|
|
Adds a test for the optimization introduced in:
stupidgcm: Open: if "dst" is big enough, use it as the output buffer
|
|
This gets us a massive speed boost in streaming reads.
|
|
This means we won't need any allocation for the plaintext.
|
|
Easily saves lots of allocations.
|
|
This will allow us to return internal buffers to a pool.
|
|
bPool verifies the lengths of slices going in and out.
Also, add a plaintext block pool - pBlockPool - and use
it for decryption.
|
|
This saves an allocation of the ciphertext block.
|
|
We use two levels of buffers:
1) 4kiB+overhead for each ciphertext block
2) 128kiB+overhead for each FUSE write (32 ciphertext blocks)
This commit adds a sync.Pool for both levels.
The memory-efficiency for small writes could be improved,
as we now always use a 128kiB buffer.
|
|
Dup2 is not implemented on linux/arm64.
Fixes https://github.com/rfjakob/gocryptfs/issues/121 .
Also adds cross-compilation to CI.
|
|
128kiB = 32 x 4kiB pages is the maximum we get from the kernel. Splitting
up smaller writes is probably not worth it.
Parallelism is limited to two for now.
|
|
Spawn a worker goroutine that reads the next 512-byte block
while the current one is being drained.
This should help reduce waiting times when /dev/urandom is very
slow (like on Linux 3.16 kernels).
|
|
On my machine, reading 512-byte blocks from /dev/urandom
(same via getentropy syscall) is a lot faster in terms of
throughput:
Blocksize Throughput
16 28.18 MB/s
512 83.75 MB/s
For a single-threaded streaming write, this drops the CPU usage of
nonceGenerator.Get to almost 1/3:
flat flat% sum% cum cum%
Before 0 0% 95.08% 0.35s 2.92% github.com/rfjakob/gocryptfs/internal/cryptocore.(*nonceGenerator).Get
After 0.01s 0.092% 92.34% 0.13s 1.20% github.com/rfjakob/gocryptfs/internal/cryptocore.(*nonceGenerator).Get
This change makes the nonce reading single-threaded, which may
hurt massively-parallel writes.
|
|
|
|
This check would need locking to be multithreading-safe.
But as it is in the fastpath, just remove it.
rand.Read() already guarantees that the value is random.
|
|
This allows easy parallelization in the future.
|
|
Uses the runtime/trace functionality.
TODO: add to man page.
|
|
Collect all the plaintext and pass everything to contentenc in
one call.
This will allow easier parallization of the encryption.
https://github.com/rfjakob/gocryptfs/issues/116
|
|
One out-of-date and the other with a typo.
|
|
|
|
Travis failed on Go 1.6.3 with this error:
internal/pathiv/pathiv_test.go:20: no args in Error call
This change should solve the problem and provides a better error
message on (real) test failure.
|
|
This was implemented in fusefrontend_reverse, but we need it
in fusefrontend as well. Move the algorithm into pathiv.BlockIV().
|
|
...under the new name "FileIVs".
This will also be used by forward mode.
|
|
We will also need it in forward mode.
|
|
These should make it easier to re-implement the key derivation
that was enabled with the "HKDF" feature flag.
|
|
With hard links, the path to a file is not unique. This means
that the ciphertext data depends on the path that is used to access
the files.
Fix that by storing the derived values when we encounter a hard-linked
file. This means that the first path wins.
|
|
This should never happen in normal operation and is a sign of
data corruption. Catch it early.
|
|
This should never happen in normal operation and is a sign of
data corruption. Catch it early.
|
|
Log the message ourselves and return EINVAL.
Before:
gocryptfs[26962]: go-fuse: can't convert error type: ParseHeader: invalid version: got 0, want 2
After:
gocryptfs[617]: ParseHeader: invalid version: want 2, got 0. Returning EINVAL.
|
|
This fixes a few issues I have found reviewing the code:
1) Limit the amount of data ReadLongName() will read. Previously,
you could send gocryptfs into out-of-memory by symlinking
gocryptfs.diriv to /dev/zero.
2) Handle the empty input case in unPad16() by returning an
error. Previously, it would panic with an out-of-bounds array
read. It is unclear to me if this could actually be triggered.
3) Reject empty names after base64-decoding in DecryptName().
An empty name crashes emeCipher.Decrypt().
It is unclear to me if B64.DecodeString() can actually return
a non-error empty result, but let's guard against it anyway.
|
|
Exiting with a fatal error just pushes users to use "-nosyslog",
which is even worse than not having a paniclog.
|
|
When a user calls into a deep directory hierarchy, we often
get a sequence like this from the kernel:
LOOKUP a
LOOKUP a/b
LOOKUP a/b/c
LOOKUP a/b/c/d
The diriv cache was not effective for this pattern, because it
was designed for this:
LOOKUP a/a
LOOKUP a/b
LOOKUP a/c
LOOKUP a/d
By also using the cached entry of the grandparent we can avoid lots
of diriv reads.
This benchmark is against a large encrypted directory hosted on NFS:
Before:
$ time ls -R nfs-backed-mount > /dev/null
real 1m35.976s
user 0m0.248s
sys 0m0.281s
After:
$ time ls -R nfs-backed-mount > /dev/null
real 1m3.670s
user 0m0.217s
sys 0m0.403s
|
|
New codes:
* OpenConf = 23
* WriteConf = 24
|
|
Empty passwords are not allowed. Let's give the error
it's own exit code.
|
|
Instead, create three new specific exit codes:
* FuseNewServer = 19
* CtlSock = 20
* PanicLogCreate = 21
|
|
This commit defines all exit codes in one place in the exitcodes
package.
Also, it adds a test to verify the exit code on incorrect
password, which is what SiriKali cares about the most.
Fixes https://github.com/rfjakob/gocryptfs/issues/77 .
|
|
Closes https://github.com/rfjakob/gocryptfs/issues/84 .
|
|
nametransform.DecryptName() now always returns syscall.EBADMSG if
the name was invalid.
fusefrontend.OpenDir error messages have been normalized.
|
|
Misspell Finds commonly misspelled English words
gocryptfs/internal/configfile/scrypt.go
Line 41: warning: "paramter" is a misspelling of "parameter" (misspell)
gocryptfs/internal/ctlsock/ctlsock_serve.go
Line 1: warning: "implementes" is a misspelling of "implements" (misspell)
gocryptfs/tests/test_helpers/helpers.go
Line 27: warning: "compatability" is a misspelling of "compatibility" (misspell)
|
|
This usually indicates that the open file limit for gocryptfs is
too low. We should report this to the user.
|
|
...and IDLock to HeaderLock. This matches what the locks actually
protect.
|
|
Now that we embed nodefs.NewDefaultFile(), we can drop our own
no-ops.
|
|
This can happen during normal operation, and is harmless since
14038a1644f17f50b113a05d09a2a0a3b3e973b2
"fusefrontend: readFileID: reject files that consist only of a header"
causes dormant header-only files to be rewritten on the next write.
|
|
We do not have to track the writeOnly status because the kernel
will not forward read requests on a write-only FD to us anyway.
I have verified this behavoir manually on a 4.10.8 kernel and also
added a testcase.
|
|
The open file table code needs some room to grow for the upcoming
FD multiplexing implementation.
|
|
The data structure was originally called write lock table, but
is now simply called the open file table. Rename the file to
reflect that.
|
|
This is a very old leftover.
|
|
This is the value EncFS uses, so let's follow suit.
Suggested at https://github.com/rfjakob/gocryptfs/issues/77 .
|
