Age | Commit message (Collapse) | Author |
|
For Linux, everything effectively stays the same. For both path-based and
fd-based Utimens() calls, we use unix.UtimesNanoAt(). To avoid introducing
a separate syscall wrapper for futimens() (as done in go-fuse, for example),
we instead use the /proc/self/fd - trick.
On macOS, this changes quite a lot:
* Path-based Utimens() calls were previously completely broken, since
unix.UtimensNanoAt() ignores the passed file descriptor. Note that this
cannot be fixed easily since there IS no appropriate syscall available on
macOS prior to High Sierra (10.13). We emulate this case by using
Fchdir() + setattrlist().
* Fd-based Utimens() calls were previously translated to f.GetAttr() (to
fill any empty parameters) and syscall.Futimes(), which does not does
support nanosecond precision. Both issues can be fixed by switching to
fsetattrlist().
Fixes https://github.com/rfjakob/gocryptfs/issues/350
|
|
This should get rid of
Openat: O_NOFOLLOW missing: flags = 0x0
Fchmodat: adding missing AT_SYMLINK_NOFOLLOW flag
sys_common_test.go:203: chmod on symlink should have failed, but did not. New mode=0333
UnmountErr: "[...]/057376762.mnt" was not found in MountInfo, cannot check for FD leak
and add some context to
--- FAIL: TestUtimesNano (0.00s)
matrix_test.go:628: no such file or directory
See https://github.com/rfjakob/gocryptfs/pull/343#issuecomment-453888006
for full test output
|
|
FchmodatNofollow dropped the flags parameter.
|
|
We never want Fchmodat to follow symlinks, so follow what
Qemu does, and call our function FchmodatNofollow.
|
|
|
|
|
|
|
|
|
|
On macOS the function has a flags argument, so we don't need the
/proc/self/fd trick used on Linux.
|
|
|
|
|
|
|
|
Fixes -allow_other mode on macOS.
|
|
When gocryptfs runs as root, we don't want to allow people to create
SUID root files.
|
|
Instead of manually adjusting the user after creating the symlink,
adjust effective permissions and let the kernel deal with it.
Related to https://github.com/rfjakob/gocryptfs/issues/338.
|
|
Instead of manually adjusting the user and mode after creating the
device file, adjust effective permissions and let the kernel deal
with it.
Related to https://github.com/rfjakob/gocryptfs/issues/338.
|
|
Revert commit fcaca5fc94d981aa637beb752edc8cb3c2265e96.
Instead of manually adjusting the user and mode after creating the
directory, adjust effective permissions and let the kernel deal with it.
Related to https://github.com/rfjakob/gocryptfs/issues/338.
|
|
Revert commit b22cc03c7516b2003880db8375d26c76d6dff093.
Instead of manually adjusting the user and mode after creating the
file, adjust effective permissions and let the kernel deal with it.
Related to https://github.com/rfjakob/gocryptfs/issues/338.
|
|
Fixes https://github.com/rfjakob/gocryptfs/issues/259
|
|
Test that we handle symlinks correctly.
|
|
Setting/removing extended attributes on directories was partially fixed with
commit eff35e60b63331e3e10f921792baa10b236a721d. However, on most file systems
it is also possible to do these operations without read access (see tests).
Since we cannot open a write-access fd to a directory, we have to use the
/proc/self/fd trick (already used for ListXAttr) for the other operations aswell.
For simplicity, let's separate the Linux and Darwin code again (basically revert
commit f320b76fd189a363a34bffe981aa67ab97df3362), and always use the
/proc/self/fd trick on Linux. On Darwin we use the best-effort approach with
openBackingFile() as a fallback.
More discussion about the available options is available in
https://github.com/rfjakob/gocryptfs/issues/308.
|
|
Also remove some unnecessary flags: When O_PATH is specified in flags, flag
bits other than O_CLOEXEC, O_DIRECTORY, and O_NOFOLLOW are ignored.
|
|
|
|
* listxattr is fixed via the /proc/self/fd trick
* setxattr,removexattr are fixed by opening the file O_WRONLY
Fixes https://github.com/rfjakob/gocryptfs/issues/308
|
|
These take care of buffer sizing and parsing.
|
|
Now symlink-safe through Readlinkat().
|
|
Old XFS filesystems always return DT_UNKNOWN. Downgrade the message
to "info" level if we are on XFS.
Using the "warning" level means that users on old XFS filesystems
cannot run the test suite as it intentionally aborts on any
warnings.
Fixes https://github.com/rfjakob/gocryptfs/issues/267
|
|
MacOS and old XFS versions do not support very long symlinks,
but let's not make the tests fail because of that.
https://github.com/rfjakob/gocryptfs/issues/267
|
|
Check for O_NWFOLLOW and O_EXCL separately to
make the logic clearer.
|
|
This fixes the "0100 directory" problem in reverse mode,
and should be slightly faster.
|
|
The function used to do two things:
1) Walk the directory tree in a manner safe from symlink attacks
2) Open the final component in the mode requested by the caller
This change drops (2), which was only used once, and lets the caller
handle it. This simplifies the function and makes it fit for reuse in
forward mode in openBackingPath(), and for using O_PATH on Linux.
|
|
These were silently ignored until now (!) but
are rejected by Go 1.11 stdlib.
Drop the flags so the tests work again, until
we figure out a better solution.
https://github.com/golang/go/issues/20130
|
|
xfstests generic/083 fills the filesystem almost completely while
running fsstress in parallel. In fsck, these would show up:
readFileID 2580: incomplete file, got 18 instead of 19 bytes
This could happen when writing the file header works, but writing
the actual data fails.
Now we kill the header again by truncating the file to zero.
|
|
O_DIRECT has no direct equivalent on MacOS
(check out https://github.com/libuv/libuv/issues/1600 for details).
Just define it to zero there.
|
|
We are clean again.
Warnings were:
internal/fusefrontend/fs.go:443:14: should omit type string from declaration
of var cTarget; it will be inferred from the right-hand side
internal/fusefrontend/xattr.go:26:1: comment on exported method FS.GetXAttr
should be of the form "GetXAttr ..."
internal/syscallcompat/sys_common.go:9:7: exported const PATH_MAX should have
comment or be unexported
|
|
Define our own, with the value from Linux.
|
|
Reported by https://goreportcard.com/report/github.com/rfjakob/gocryptfs
|
|
macos rm does not understand --one-file-system,
and it cannot handle unreadable directories.
|
|
|
|
The limit is much lower than on Linux.
https://github.com/rfjakob/gocryptfs/issues/213
|
|
On MacOS, symlinks don't have their own permissions,
so don't check for them.
|
|
The test is known to fail on gccgo
(https://github.com/rfjakob/gocryptfs/issues/201), but
getdents emulation is not used on linux, so let's skip
the test and ignore the failure.
|
|
$ go.gcc build
# github.com/rfjakob/gocryptfs/internal/syscallcompat
internal/syscallcompat/unix2syscall_linux.go:32:13: error: incompatible types in assignment (cannot use type int64 as type syscall.Timespec_sec_t)
s.Atim.Sec = u.Atim.Sec
^
|
|
For some reason the syscall.NAME_MAX constant does not exist
on gccgo, and it does not hurt us to use unix.NAME_MAX instead.
https://github.com/rfjakob/gocryptfs/issues/201
|
|
On mips64le, syscall.Getdents() and struct syscall.Dirent do
not fit together, causing our Getdents implementation to
return garbage ( https://github.com/rfjakob/gocryptfs/issues/200
and https://github.com/golang/go/issues/23624 ).
Switch to unix.Getdents which does not have this problem -
the next Go release with the syscall package fixes is too
far away, and will take time to trickle into distros.
|
|
Due to padding between entries, it is 280 even on 32-bit architectures.
See https://github.com/rfjakob/gocryptfs/issues/197 for details.
|
|
We used to print somewhat strange messages:
Getdents: corrupt entry #1: Reclen=276 > 280. Returning EBADR
Reported at https://github.com/rfjakob/gocryptfs/issues/197
|
|
syscall.ParseDirent only returns the NAMES, we want
everything.
|
|
|
|
Add faccessat(2) with a hack for symlink, because the
kernel does not actually looks at the passed flags.
From man 2 faccessat:
C library/kernel differences
The raw faccessat() system call takes only the first three argu‐
ments. The AT_EACCESS and AT_SYMLINK_NOFOLLOW flags are actually
implemented within the glibc wrapper function for faccessat().
|