summaryrefslogtreecommitdiff
path: root/internal/nametransform/diriv.go
AgeCommit message (Collapse)Author
2021-08-20Implement -deterministic-names: extended -zerodirivJakob Unterwurzacher
-deterministc-names uses all-zero dirivs but does not write them to disk anymore.
2021-08-19Flag -zerodiriv to create all diriv as all zero byte filesJose M Perez
2021-06-21nametransform: gather badname functions in badname.goJakob Unterwurzacher
2021-06-20Badname file content accessDerDonut
This proposal is the counterpart of the modifications from the `-badname` parameter. It modifies the plain -> cipher mapping for filenames when using `-badname` parameter. The new function `EncryptAndHashBadName` tries to find a cipher filename for the given plain name with the following steps: 1. If `badname` is disabled or direct mapping is successful: Map directly (default and current behaviour) 2. If a file with badname flag has a valid cipher file, this is returned (=File just ends with the badname flag) 3. If a file with a badname flag exists where only the badname flag was added, this is returned (=File cipher name could not be decrypted by function `DecryptName` and just the badname flag was added) 4. Search for all files which cipher file name extists when cropping more and more characters from the end. If only 1 file is found, return this 5. Return an error otherwise This allows file access in the file browsers but most important it allows that you rename files with undecryptable cipher names in the plain directories. Renaming those files will then generate a proper cipher filename One backdraft: When mounting the cipher dir with -badname parameter, you can never create (or rename to) files whose file name ends with the badname file flag (at the moment this is " GOCRYPTFS_BAD_NAME"). This will cause an error. I modified the CLI test function to cover additional test cases. Test [Case 7](https://github.com/DerDonut/gocryptfs/blob/badnamecontent/tests/cli/cli_test.go#L712) cannot be performed since the cli tests are executed in panic mode. The testing is stopped on error. Since the function`DecryptName` produces internal errors when hitting non-decryptable file names, this test was omitted. This implementation is a proposal where I tried to change the minimum amount of existing code. Another possibility would be instead of creating the new function `EncryptAndHashBadName` to modify the signature of the existing function `EncryptAndHashName(name string, iv []byte)` to `EncryptAndHashName(name string, iv []byte, dirfd int)` and integrate the functionality into this function directly. You may allow calling with dirfd=-1 or other invalid values an then performing the current functionality.
2021-06-02nametransform: check name validity on encryptionJakob Unterwurzacher
xfstests generic/523 discovered that we allowed to set xattrs with "/" in the name, but did not allow to read them later. With this change we do not allow to set them in the first place.
2021-01-10nametransform: move permission constants to perms.goJakob Unterwurzacher
Prep for https://github.com/rfjakob/gocryptfs/issues/539
2020-10-14syscallcompat: retry ops on EINTRJakob Unterwurzacher
Retry operations that have been shown to throw EINTR errors on CIFS. Todo: Solution for this pain in the back: warning: unix.Getdents returned errno 2 in the middle of data rm: cannot remove 'linux-3.0.old3/Documentation/ABI/removed': Input/output error Progress towards fixing https://github.com/rfjakob/gocryptfs/issues/483 .
2020-05-10Fix spelling mistakes found by misspellJakob Unterwurzacher
https://github.com/client9/misspell
2019-03-30forward mode: create gocryptfs.diriv files with 0440 permissionsJakob Unterwurzacher
Makes it easier to share an encrypted folder via a network drive. https://github.com/rfjakob/gocryptfs/issues/387
2019-02-17nametransform: reject names longer than 255 charsJakob Unterwurzacher
Looks like we allowed creating longer names by accident. Fix that, and add a test that verifies it.
2019-01-04nametransform: ReadDirIVAt: return raw syscall errorJakob Unterwurzacher
Otherwise this can happen, as triggered by xfstests generic/011: go-fuse: can't convert error type: openat failed: too many open files The app then gets a misleading "Function not implemented" error.
2019-01-03nametransform: simplify WriteDirIV to WriteDirIVAtJakob Unterwurzacher
Un-spaghettify the function and let the callers open the directory.
2019-01-02fusefronted: make EncryptPath symlink-safeJakob Unterwurzacher
Finally allows us to delete EncryptPathDirIV.
2019-01-01fusefrontend: make OpenDir() symlink-safeJakob Unterwurzacher
Interestingly, little or no performance impact: $ ./benchmark.bash Testing gocryptfs at /tmp/benchmark.bash.39W: gocryptfs v1.6-42-g30c2349-dirty; go-fuse v20170619-66-g6df8ddc; 2018-11-04 go1.11 Downloading linux-3.0.tar.gz /tmp/linux-3.0.tar.gz 100%[=========================================================================>] 92.20M 2.93MB/s in 31s 2018-11-04 21:44:44 URL:https://cdn.kernel.org/pub/linux/kernel/v3.0/linux-3.0.tar.gz [96675825/96675825] -> "/tmp/linux-3.0.tar.gz" [1] WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.1808 s, 222 MB/s READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.866438 s, 303 MB/s UNTAR: 24.745 MD5: 12.050 LS: 3.525 RM: 9.544 Note: kernel has been updated: $ uname -a Linux brikett 4.18.16-200.fc28.x86_64 #1 SMP Sat Oct 20 23:53:47 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
2019-01-01fusefrontend: make openBackingDir() symlink-safeJakob Unterwurzacher
openBackingDir() used encryptPath(), which is not symlink-safe itself. Drop encryptPath() and implement our own directory walk. Adds three seconds to untar and two seconds to rm: $ ./benchmark.bash Testing gocryptfs at /tmp/benchmark.bash.MzG: gocryptfs v1.6-36-g8fb3c2f-dirty; go-fuse v20170619-66-g6df8ddc; 2018-10-14 go1.11 WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.25078 s, 210 MB/s READ: 262144000 bytes (262 MB, 250 MiB) copied, 1.0318 s, 254 MB/s UNTAR: 20.941 MD5: 11.568 LS: 1.638 RM: 5.337
2019-01-01nametransform: comments: directly link to ioutil.WriteFile fixJakob Unterwurzacher
So the reader does not have to read through the whole ticket. The commit message has a nice summary of the problem.
2018-09-23fusefrontend: get rid of os.File* wrappingJakob Unterwurzacher
Directly use int file descriptors for the dirfd and get rid of one level of indirection.
2018-07-15fusefrontend: doWrite: delete file header if first write failsJakob Unterwurzacher
xfstests generic/083 fills the filesystem almost completely while running fsstress in parallel. In fsck, these would show up: readFileID 2580: incomplete file, got 18 instead of 19 bytes This could happen when writing the file header works, but writing the actual data fails. Now we kill the header again by truncating the file to zero.
2018-07-15WriteDirIV: delete incomplete gocryptfs.diriv file if write failsJakob Unterwurzacher
If the underlying filesystem is full, writing to gocryptfs.diriv may fail, and later fsck show this: OpenDir "xyz": could not read gocryptfs.diriv: wanted 16 bytes, got 0 Uncovered by xfstests generic/083. Also fixes a fd leak in the error path.
2018-04-02fsck: clean up log outputJakob Unterwurzacher
Make sure we get only 1 warning output per problem. Also, add new corruption types to broken_fs_v1.4.
2018-02-01gccgo: replace syscall.NAME_MAX with unix.NAME_MAXJakob Unterwurzacher
For some reason the syscall.NAME_MAX constant does not exist on gccgo, and it does not hurt us to use unix.NAME_MAX instead. https://github.com/rfjakob/gocryptfs/issues/201
2017-12-01fusefrontend: Improve documentation of mkdirWithIv and WriteDirIVSebastian Lackner
As requested in https://github.com/rfjakob/gocryptfs/pull/179
2017-11-30syscallcompat: check that we get NOFOLLOW wherever possibleJakob Unterwurzacher
...and fix the instances where the AT_SYMLINK_NOFOLLOW / O_NOFOLLOW / O_EXCL flag was missing.
2017-11-29fusefrontend: allow_other: close race between mkdir and chownSebastian Lackner
Fixes the same problem as described in 72b975867a3b9bdf53fc2da62e2ba4a328d7e4ab, except for directories instead of device nodes.
2017-08-09nametransform: extend diriv cache to 100 entriesJakob Unterwurzacher
* extend the diriv cache to 100 entries * add special handling for the immutable root diriv The better cache allows to shed some complexity from the path encryption logic (parent-of-parent check). Mitigates https://github.com/rfjakob/gocryptfs/issues/127
2017-08-06nametransform: add Dir() functionJakob Unterwurzacher
Dir is like filepath.Dir but returns "" instead of ".". This was already implemented in fusefrontend_reverse as saneDir(). We will need it in nametransform for the improved diriv caching.
2017-08-06nametransform: move diriv cache into it's own packageJakob Unterwurzacher
Needs some space to grow. renamed: internal/nametransform/diriv_cache.go -> internal/nametransform/dirivcache/dirivcache.go
2017-08-06nametransform: deduplicate code to encryptAndHashName()Jakob Unterwurzacher
This operation has been done three time by identical sections of code. Create a function for it.
2017-05-25nametransform: reject all-zero dirIVJakob Unterwurzacher
This should never happen in normal operation and is a sign of data corruption. Catch it early.
2017-05-22nametransform: diriv cache: fall back to the grandparentJakob Unterwurzacher
When a user calls into a deep directory hierarchy, we often get a sequence like this from the kernel: LOOKUP a LOOKUP a/b LOOKUP a/b/c LOOKUP a/b/c/d The diriv cache was not effective for this pattern, because it was designed for this: LOOKUP a/a LOOKUP a/b LOOKUP a/c LOOKUP a/d By also using the cached entry of the grandparent we can avoid lots of diriv reads. This benchmark is against a large encrypted directory hosted on NFS: Before: $ time ls -R nfs-backed-mount > /dev/null real 1m35.976s user 0m0.248s sys 0m0.281s After: $ time ls -R nfs-backed-mount > /dev/null real 1m3.670s user 0m0.217s sys 0m0.403s
2017-04-29nametransform: WriteDirIV: replace ioutil.WriteFileJakob Unterwurzacher
As reported at https://github.com/rfjakob/gocryptfs/issues/105 , the "ioutil.WriteFile(file, iv, 0400)" call causes "permissions denied" errors on an NFSv4 setup. "strace"ing diriv creation and gocryptfs.conf creation shows this: conf (works on the user's NFSv4 mount): openat(AT_FDCWD, "/tmp/a/gocryptfs.conf.tmp", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0400) = 3 diriv (fails): openat(AT_FDCWD, "/tmp/a/gocryptfs.diriv", O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0400) = 3 This patch creates the diriv file with the same flags that are used for creating the conf: openat(AT_FDCWD, "/tmp/a/gocryptfs.diriv", O_WRONLY|O_CREAT|O_EXCL|O_CLOEXEC, 0400) = 3 Closes https://github.com/rfjakob/gocryptfs/issues/105
2017-03-05nametransform: fix Raw64 not affecting longnamesJakob Unterwurzacher
HashLongName() incorrectly hardcoded the call to base64.URLEncoding.
2016-11-09nametransform: get rid of leading "./"Jakob Unterwurzacher
Paths in the root directory were encrypted to this: foobar -> ./N9vPc0gXUY4PDSt0-muYXQ==
2016-11-06nametransform: nicer error message on empty gocryptfs.dirivJakob Unterwurzacher
Old: Nov 06 13:34:38 brikett gocryptfs[16228]: ReadDirIVAt: Read failed: EOF Nov 06 13:34:38 brikett gocryptfs[16228]: go-fuse: can't convert error type: EOF New: Nov 06 14:08:43 brikett gocryptfs[17361]: ReadDirIVAt: wanted 16 bytes, got 0. Returning EINVAL.
2016-11-01fusefrontend: refactor dirIVCacheJakob Unterwurzacher
Simplify the code a bit.
2016-10-24Fix misspellingsJakob Unterwurzacher
Close https://github.com/rfjakob/gocryptfs/issues/54
2016-10-07nametransform: better error code on invalid diriv lengthJakob Unterwurzacher
go-fuse translates errors unknown to it into "function not implemented", which is wrong in this case.
2016-10-04lint fixesValient Gough
2016-09-25nametransform: delete unused function DecryptPathDirIVJakob Unterwurzacher
2016-09-25nametransform: implement ReadDirIV without OpenatJakob Unterwurzacher
As ReadDirIV operates on a path anyway, opening the directory has no clear safety advantage w.r.t. concurrent renames. If the backing directory is a reverse-mounted gocryptfs filesystem, each directory open is an OPENDIR, and this causes a full directory read! This patch improves the "ls -lR" performance of an DIR --> gocryptfs-reverse --> gocryptfs chain by a factor of ~10. OPENDIR counts for ls -lR: Before 15570 After 2745
2016-09-25nametransform: export DirIVLen constantJakob Unterwurzacher
Will be needed by reverse mode.
2016-07-03syscallcompat: OSX: add Unlinkat wrapperJakob Unterwurzacher
Also, replace remaining naked syscall.Openat calls.
2016-06-16Rename nametransform, contentenc source filesJakob Unterwurzacher
Let's have shorter names, and merge *_api.go into the "main" file. No code changes.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 10:46:57 +0000