aboutsummaryrefslogtreecommitdiff
path: root/internal/fusefrontend_reverse
AgeCommit message (Collapse)Author
2017-04-29fix golint complaintsJakob Unterwurzacher
2017-04-23Add -forcedecodedanim7
Force decode of encrypted files even if the integrity check fails, instead of failing with an IO error. Warning messages are still printed to syslog if corrupted files are encountered. It can be useful to recover files from disks with bad sectors or other corrupted media. Closes https://github.com/rfjakob/gocryptfs/pull/102 .
2017-04-01fusefrontend_reverse: switch to stable inode numbersJakob Unterwurzacher
The volatile inode numbers that we used before cause "find" to complain and error out. Virtual inode numbers are derived from their parent file inode number by adding 10^19, which is hopefully large enough no never cause problems in practice. If the backing directory contains inode numbers higher than that, stat() on these files will return EOVERFLOW. Example directory lising after this change: $ ls -i 926473 gocryptfs.conf 1000000000000926466 gocryptfs.diriv 944878 gocryptfs.longname.hmZojMqC6ns47eyVxLlH2ailKjN9bxfosi3C-FR8mjA 1000000000000944878 gocryptfs.longname.hmZojMqC6ns47eyVxLlH2ailKjN9bxfosi3C-FR8mjA.name 934408 Tdfbf02CKsTaGVYnAsSypA
2017-04-01fusefrontend_reverse: drop unused dirIVAttr functionJakob Unterwurzacher
This has long been replaced by virtualFile.GetAttr().
2017-04-01fusefrontend_reverse: convert fmt.Printf calls to tlogJakob Unterwurzacher
The fmt.Printfs output would end up in the paniclog.
2017-04-01fusefrontend_reverse: add comment to newVirtualFileJakob Unterwurzacher
...and improve and comment variable naming in findLongnameParent. No semantic changes.
2017-03-28fusefrontend_reverse: consistent file owners for .diriv, .name filesdanim7
This PR addresses the Issue #95, about "Confusing file owner for longname files in reverse mode". It affects only the reverse mode, and introduces two modifications: 1) The "gocryptfs.longname.XXXX.name" files are assigned the owner and group of the underlying plaintext file. Therefore it is consistent with the file "gocryptfs.longname.XXXX" that has the encrypted contents of the plaintext file. 2) The two virtual files mentioned above are given -r--r--r-- permissions. This is consistent with the behavior described in function Access in internal/fusefrontend_reverse/rfs.go where all virtual files are always readable. Behavior also observed in point c) in #95 . Issue #95 URL: https://github.com/rfjakob/gocryptfs/issues/95 Pull request URL: https://github.com/rfjakob/gocryptfs/pull/97
2017-03-07Report correct symbolic link dentry sizesM. Vefa Bicakci
Prior to this commit, gocryptfs's reverse mode did not report correct directory entry sizes for symbolic links, where the dentry size needs to be the same as the length of a string containing the target path. This commit corrects this issue and adds a test case to verify the correctness of the implementation. This issue was discovered during the use of a strict file copying program on a reverse-mounted gocryptfs file system.
2017-03-05nametransform: fix Raw64 not affecting symlink targetsJakob Unterwurzacher
The symlink functions incorrectly hardcoded the padded base64 variant.
2017-03-05nametransform: fix Raw64 not affecting longnamesJakob Unterwurzacher
HashLongName() incorrectly hardcoded the call to base64.URLEncoding.
2017-03-05full stack: implement HKDF supportJakob Unterwurzacher
...but keep it disabled by default for new filesystems. We are still missing an example filesystem and CLI arguments to explicitely enable and disable it.
2017-03-05cryptocore: use eme v1.1 interfaceJakob Unterwurzacher
Version 1.1 of the EME package (github.com/rfjakob/eme) added a more convenient interface. Use it. Note that you have to upgrade your EME package (go get -u)!
2017-02-16tests: reverse: check Access() callJakob Unterwurzacher
2017-02-16fusefrontend_reverse: handle .name files in Access()Jakob Unterwurzacher
These were currently passed to decryptPath() were it caused a warning.
2017-01-03reverse: add single-entry path cacheJakob Unterwurzacher
Speeds up the "ls -lR" benchmark from 2.6 seconds to 2.0.
2017-01-03reverse: factor out rDecryptNameJakob Unterwurzacher
This prepares the code for the introduction of a path cache.
2016-12-10Replace all calls to naked panic() with log.Panic()Jakob Unterwurzacher
We want all panics to show up in the syslog.
2016-11-17fusefrontend: upgrade wlockMap to use device AND inode numberJakob Unterwurzacher
If there are multiple filesystems backing the gocryptfs filesystems inode numbers are not guaranteed to be unique.
2016-11-10ctlsock: prevent panic on invalid decrypt requestJakob Unterwurzacher
2016-11-10ctlsock: implement EncryptPath for reverse mode, add testsJakob Unterwurzacher
2016-11-10reverse: fix longname decoding bugJakob Unterwurzacher
This could have caused spurious ENOENT errors. That it did not cause these errors all the time is interesting and probably because an earlier readdir would place the entry in the cache. This masks the bug.
2016-11-10Fix golint warningsJakob Unterwurzacher
$ golint ./... | grep -v underscore | grep -v ALL_CAPS internal/fusefrontend_reverse/rfs.go:52:36: exported func NewFS returns unexported type *fusefrontend_reverse.reverseFS, which can be annoying to use internal/nametransform/raw64_go1.5.go:10:2: exported const HaveRaw64 should have comment (or a comment on this block) or be unexported
2016-11-10ctlsock: add initial limited implementationJakob Unterwurzacher
At the moment, in forward mode you can only encrypt paths and in reverse mode you can only decrypt paths.
2016-11-01Add support for unpadded base64 filenames, "-raw64"Jakob Unterwurzacher
Through base64.RawURLEncoding. New command-line parameter "-raw64".
2016-10-24Fix misspellingsJakob Unterwurzacher
Close https://github.com/rfjakob/gocryptfs/issues/54
2016-10-09reverse: add panics against API abuseJakob Unterwurzacher
These should help prevent later programming errors.
2016-10-08reverse: gocryptfs.conf was missing from the directory listingsJakob Unterwurzacher
Fix the test for that and add checks in example_filesystems_test.
2016-10-08reverse: merge config translation check into isTranslatedConfigJakob Unterwurzacher
Also get rid of useless isFiltered function.
2016-10-08reverse: make gocryptfs.conf mapping plaintextnames-awareJakob Unterwurzacher
Only in plaintextnames-mode AND with the config file at the default location it will be mapped into the mountpoint. Also adds a test for that.
2016-10-05reverse: initialize the longname cache only when reverse mode is usedJakob Unterwurzacher
Gets rid of the idling longnameCacheCleaner thread in "normal" mode.
2016-10-04lint fixesValient Gough
2016-10-04fusefrontend_reverse cast Stat_t.Dev to uint64 (#44)Romain
The [Stat_t.Dev](https://golang.org/pkg/syscall/#Stat_t) docs say `Dev` is a `unit64`, but on [macOS amd64](https://golang.org/src/syscall/ztypes_darwin_amd64.go) it's an `int32`.
2016-09-29reverse: use per-purpose nonce generationJakob Unterwurzacher
Also pull all the deterministic nonce code into fusefrontend_reverse to greatly simplify the normal code path.
2016-09-28reverse: move newDirIVFile into virtualfile.goJakob Unterwurzacher
After all, is's a virtual file.
2016-09-25Implement changes proposed by gosimple.Jakob Unterwurzacher
Also delete the unused "dirIVNameStruct", found by deadcode.
2016-09-25tests: enable all go vet checksJakob Unterwurzacher
...and fix reported errors: internal/fusefrontend_reverse/rfile.go:40: github.com/rfjakob/gocryptfs/internal/contentenc.FileHeader composite literal uses unkeyed fields internal/fusefrontend_reverse/rfs.go:249: github.com/hanwen/go-fuse/fuse.DirEntry composite literal uses unkeyed fields internal/fusefrontend_reverse/rfs.go:264: github.com/hanwen/go-fuse/fuse.DirEntry composite literal uses unkeyed fields
2016-09-25contentenc: rename constant "IVBitLen" to "DefaultIVBits" and clarify commentJakob Unterwurzacher
128-bit IVs are NOT used everywhere.
2016-09-25reverse: add symlink encryption and Readlink supportJakob Unterwurzacher
2016-09-25reverse: derive file ID and block IVs from file pathsJakob Unterwurzacher
2016-09-25reverse: add longnameParentCacheJakob Unterwurzacher
findLongnameParent has to read the whole directory to find the right file; add a simple cache to avoid most directory scans.
2016-09-25reverse: resolve long names in Open and GetAttrJakob Unterwurzacher
The last patch added functionality for generating gocryptfs.longname.* files, this patch adds support for mapping them back to the full filenames. Note that resolving a long name needs a full readdir. A cache will be implemented later on to improve performance.
2016-09-25reverse: transform long names in OpenDirJakob Unterwurzacher
2016-09-25reverse: use dynamic inode numbersJakob Unterwurzacher
...with stable mappings for hard-linked files.
2016-09-25contentenc: add GCM-SIV supportJakob Unterwurzacher
Also add ReverseDummyNonce nonce generation.
2016-09-25cryptocore: add support for GCM-SIVJakob Unterwurzacher
2016-09-25reverse: fix GetAttr for gocryptfs.confJakob Unterwurzacher
And also don't return the encrypted version of .gocryptfs.reverse.conf in readdir.
2016-09-25reverse: add gocryptfs.conf passthroughJakob Unterwurzacher
2016-09-25reverse: get rid of debug messageJakob Unterwurzacher
2016-09-25reverse: gocryptfs.diriv content was generated from wrong pathJakob Unterwurzacher
Should be derived from the directory name only.
2016-09-25reverse: rename readFile to clearer readBackingFileJakob Unterwurzacher
Also refactor the header generation for nicer code.
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 20:14:26 +0000