summaryrefslogtreecommitdiff
path: root/internal/fusefrontend
AgeCommit message (Collapse)Author
2017-11-28fusefrontend: Handle PlaintextNames mode in MknodSebastian Lackner
In PlaintextNames mode the "gocryptfs.longname." prefix does not have any special meaning. We should not attempt to read the directory IV or to create special .name files. Partially fixes https://github.com/rfjakob/gocryptfs/issues/174
2017-11-27fusefronted: allow_other: close race between mknod and chownJakob Unterwurzacher
If the user manages to replace the directory with a symlink at just the right time, we could be tricked into chown'ing the wrong file. This change fixes the race by using fchownat, which unfortunately is not available on darwin, hence a compat wrapper is added. Scenario, as described by @slackner at https://github.com/rfjakob/gocryptfs/issues/177 : 1. Create a forward mount point with `plaintextnames` enabled 2. Mount as root user with `allow_other` 3. For testing purposes create a file `/tmp/file_owned_by_root` which is owned by the root user 4. As a regular user run inside of the GoCryptFS mount: ``` mkdir tempdir mknod tempdir/file_owned_by_root p & mv tempdir tempdir2 ln -s /tmp tempdir ``` When the steps are done fast enough and in the right order (run in a loop!), the device file will be created in `tempdir`, but the `lchown` will be executed by following the symlink. As a result, the ownership of the file located at `/tmp/file_owned_by_root` will be changed.
2017-11-25fusefrontend: Skip gocryptfs.diriv handling when directory was deleted ↵Sebastian Lackner
successfully Fixes https://github.com/rfjakob/gocryptfs/issues/171 Steps to reproduce: * Create a regular forward mount point * Create a new directory in the mount point * Manually delete the gocryptfs.diriv file from the corresponding ciphertext directory * Attempt to delete the directory with 'rmdir <dirname>' Although the code explicitly checks for empty directories, it will still attempt to move the non-existent gocryptfs.diriv file and fails with: rmdir: failed to remove '<dirname>': No such file or directory
2017-11-25fusefrontend: Fix longname handling for renames with existing targetSebastian Lackner
Fixes https://github.com/rfjakob/gocryptfs/issues/170 Steps to reproduce the problem: * Create a regular forward mount point * Create a file with a shortname and one with a long filename * Try to run 'mv <shortname> <longname>' This should actually work and replace the existing file, but instead it fails with: mv: cannot move '<shortname>' to '<longname>': File exists The problem is the creation of the .name file. If the target already exists we can safely ignore the EEXIST error and just keep the existing .name file.
2017-10-21Revert most of "fusefrontend: clamp oversized reads"Jakob Unterwurzacher
We cannot return less data than requested to the kernel! From https://libfuse.github.io/doxygen/structfuse__operations.html: Read should return exactly the number of bytes requested except on EOF or error, otherwise the rest of the data will be substituted with zeroes. Reverts commit 3009ec9852316c3c696f77f476390ab5a6d8d6d7 minus the formatting improvements we want to keep. Fixes https://github.com/rfjakob/gocryptfs/issues/147 Reopens https://github.com/rfjakob/gocryptfs/issues/145
2017-10-17fusefrontend: clamp oversized readsJakob Unterwurzacher
Our byte cache pools are sized acc. to MAX_KERNEL_WRITE, but the running kernel may have a higher limit set. Clamp to what we can handle. Fixes a panic on a Synology NAS reported at https://github.com/rfjakob/gocryptfs/issues/145
2017-09-05macos: automatically remove .DS_Store on RmdirJakob Unterwurzacher
MacOS sprinkles .DS_Store files everywhere. This is hard to avoid for users, so handle it transparently in Rmdir(). Mitigates https://github.com/rfjakob/gocryptfs/issues/140
2017-09-05fusefrontend: reorder logic in Rmdir to get rid of one indentation levelJakob Unterwurzacher
Handle the errors first so that the normal code path is not indented. This should not cause any behavoir changes.
2017-09-05macos: don't throw IO errors because of .DS_Store filesJakob Unterwurzacher
MacOS creates lots of these files, and if the directory is otherwise empty, we would throw an IO error to the unsuspecting user. With this patch, we log a warning, but otherwise pretend we did not see it. Mitigates https://github.com/rfjakob/gocryptfs/issues/140
2017-09-03syscallcompat: Getdents: warn once if we get DT_UNKNOWNJakob Unterwurzacher
...and if Getdents is not available at all. Due to this warning I now know that SSHFS always returns DT_UNKNOWN: gocryptfs[8129]: Getdents: convertDType: received DT_UNKNOWN, falling back to Lstat This behavoir is confirmed at http://ahefner.livejournal.com/16875.html: "With sshfs, I finally found that obscure case. The dtype is always set to DT_UNKNOWN [...]"
2017-09-03fusefrontend: use DirIVCache in OpenDir()Jakob Unterwurzacher
Previously, OpenDir() did not use the cache at all, missing an opportunity to speed up repeated directory reads.
2017-08-15fusefrontend: use Getdents if availableJakob Unterwurzacher
Getdents avoids calling Lstat on each file.
2017-08-11main: purge masterkey from memory as soon as possibleJakob Unterwurzacher
Remove the "Masterkey" field from fusefrontend.Args because it should not be stored longer than neccessary. Instead pass the masterkey as a separate argument to the filesystem initializers. Then overwrite it with zeros immediately so we don't have to wait for garbage collection. Note that the crypto implementation still stores at least a masterkey-derived value, so this change makes it harder, but not impossible, to extract the encryption keys from memory. Suggested at https://github.com/rfjakob/gocryptfs/issues/137
2017-07-11fusefronted: enable writing to write-only filesJakob Unterwurzacher
Due to RMW, we always need read permissions on the backing file. This is a problem if the file permissions do not allow reading (i.e. 0200 permissions). This patch works around that problem by chmod'ing the file, obtaining a fd, and chmod'ing it back. Test included. Issue reported at: https://github.com/rfjakob/gocryptfs/issues/125
2017-07-02fusefrontend: doRead: skip decryption for an empty readJakob Unterwurzacher
Previously we ran through the decryption steps even for an empty ciphertext slice. The functions handle it correctly, but returning early skips all the extra calls. Speeds up the tar extract benchmark by about 4%.
2017-06-30contentenc: add PReqPool and use it in DecryptBlocksJakob Unterwurzacher
This gets us a massive speed boost in streaming reads.
2017-06-30fusefrontend: doRead: use CReqPool for ciphertext bufferJakob Unterwurzacher
Easily saves lots of allocations.
2017-06-30fusefrontend: Read: use provided bufferJakob Unterwurzacher
This will allow us to return internal buffers to a pool.
2017-06-29contentenc: add safer "bPool" pool variant; add pBlockPoolJakob Unterwurzacher
bPool verifies the lengths of slices going in and out. Also, add a plaintext block pool - pBlockPool - and use it for decryption.
2017-06-20contentenc: use sync.Pool memory pools for encryptionJakob Unterwurzacher
We use two levels of buffers: 1) 4kiB+overhead for each ciphertext block 2) 128kiB+overhead for each FUSE write (32 ciphertext blocks) This commit adds a sync.Pool for both levels. The memory-efficiency for small writes could be improved, as we now always use a 128kiB buffer.
2017-06-09Fix missing Owner coercion for already-open files (#117)Charles Duffy
2017-06-01fusefrontend: write: consolidate and move encryption to contentencJakob Unterwurzacher
Collect all the plaintext and pass everything to contentenc in one call. This will allow easier parallization of the encryption. https://github.com/rfjakob/gocryptfs/issues/116
2017-06-01Implement force_owner option to display ownership as a specific user.Charles Duffy
2017-05-23nametransform: harden name decryption against invalid inputJakob Unterwurzacher
This fixes a few issues I have found reviewing the code: 1) Limit the amount of data ReadLongName() will read. Previously, you could send gocryptfs into out-of-memory by symlinking gocryptfs.diriv to /dev/zero. 2) Handle the empty input case in unPad16() by returning an error. Previously, it would panic with an out-of-bounds array read. It is unclear to me if this could actually be triggered. 3) Reject empty names after base64-decoding in DecryptName(). An empty name crashes emeCipher.Decrypt(). It is unclear to me if B64.DecodeString() can actually return a non-error empty result, but let's guard against it anyway.
2017-05-07fusefrontend: implement path decryption via ctlsockJakob Unterwurzacher
Closes https://github.com/rfjakob/gocryptfs/issues/84 .
2017-05-07nametranform, fusefrontend: better errors on invalid namesJakob Unterwurzacher
nametransform.DecryptName() now always returns syscall.EBADMSG if the name was invalid. fusefrontend.OpenDir error messages have been normalized.
2017-05-03fusefrontend: log "too many open files" errorsJakob Unterwurzacher
This usually indicates that the open file limit for gocryptfs is too low. We should report this to the user.
2017-05-01openfiletable: rename WriteLock to ContentLockJakob Unterwurzacher
...and IDLock to HeaderLock. This matches what the locks actually protect.
2017-05-01fusefrontend: rely on nodefs.defaultFile for no-op functionsJakob Unterwurzacher
Now that we embed nodefs.NewDefaultFile(), we can drop our own no-ops.
2017-05-01fusefrontend: drop writeOnly flagJakob Unterwurzacher
We do not have to track the writeOnly status because the kernel will not forward read requests on a write-only FD to us anyway. I have verified this behavoir manually on a 4.10.8 kernel and also added a testcase.
2017-05-01fusefronted, openfiletable: move the open file table to its own packageJakob Unterwurzacher
The open file table code needs some room to grow for the upcoming FD multiplexing implementation.
2017-04-29fusefrontend: rename write_lock.go -> open_file_table.goJakob Unterwurzacher
The data structure was originally called write lock table, but is now simply called the open file table. Rename the file to reflect that.
2017-04-29fusefronted: drop unused file.String() functionJakob Unterwurzacher
This is a very old leftover.
2017-04-29fix golint complaintsJakob Unterwurzacher
2017-04-24forcedecode: tighten checksJakob Unterwurzacher
...and fix a few golint issues and print a scary warning message on mount. Also, force the fs to ro,noexec.
2017-04-23Add -forcedecodedanim7
Force decode of encrypted files even if the integrity check fails, instead of failing with an IO error. Warning messages are still printed to syslog if corrupted files are encountered. It can be useful to recover files from disks with bad sectors or other corrupted media. Closes https://github.com/rfjakob/gocryptfs/pull/102 .
2017-04-23Fix Flock build breakageJakob Unterwurzacher
go-fuse has added a new method to the nodefs.File interface that caused this build error: internal/fusefrontend/file.go:75: cannot use file literal (type *file) as type nodefs.File in return argument: *file does not implement nodefs.File (missing Flock method) Fixes https://github.com/rfjakob/gocryptfs/issues/104 and prevents the problem from happening again.
2017-04-01fusefrontend_reverse: switch to stable inode numbersJakob Unterwurzacher
The volatile inode numbers that we used before cause "find" to complain and error out. Virtual inode numbers are derived from their parent file inode number by adding 10^19, which is hopefully large enough no never cause problems in practice. If the backing directory contains inode numbers higher than that, stat() on these files will return EOVERFLOW. Example directory lising after this change: $ ls -i 926473 gocryptfs.conf 1000000000000926466 gocryptfs.diriv 944878 gocryptfs.longname.hmZojMqC6ns47eyVxLlH2ailKjN9bxfosi3C-FR8mjA 1000000000000944878 gocryptfs.longname.hmZojMqC6ns47eyVxLlH2ailKjN9bxfosi3C-FR8mjA.name 934408 Tdfbf02CKsTaGVYnAsSypA
2017-03-18fusefrontend: get rid of leftover debug outputJakob Unterwurzacher
2017-03-18serialize_reads: add read serialization logicJakob Unterwurzacher
Due to kernel readahead, we usually get multiple read requests at the same time. These get submitted to the backing storage in random order, which is a problem if seeking is very expensive. Details: https://github.com/rfjakob/gocryptfs/issues/92
2017-03-12fusefrontend: readFileID: reject files that consist only of a headerJakob Unterwurzacher
A header-only file will be considered empty (this is not supposed to happen). This makes File ID poisoning more difficult.
2017-03-12fusefrontend: truncateGrowFile: avoid createHeader() callJakob Unterwurzacher
...if doWrite() can do it for us. This avoids the situation that the file only consists of a file header when calling doWrite. A later patch will check for this condition and warn about it, as with this change it should no longer occour in normal operation.
2017-03-05nametransform: fix Raw64 not affecting symlink targetsJakob Unterwurzacher
The symlink functions incorrectly hardcoded the padded base64 variant.
2017-03-05full stack: implement HKDF supportJakob Unterwurzacher
...but keep it disabled by default for new filesystems. We are still missing an example filesystem and CLI arguments to explicitely enable and disable it.
2017-03-05cryptocore: rename "BackendTypeEnum" -> "AEADTypeEnum"Jakob Unterwurzacher
There are two independent backends, one for name encryption, the other one, AEAD, for file content. "BackendTypeEnum" only applies to AEAD (file content), so make that clear in the name.
2017-03-05cryptocore: use eme v1.1 interfaceJakob Unterwurzacher
Version 1.1 of the EME package (github.com/rfjakob/eme) added a more convenient interface. Use it. Note that you have to upgrade your EME package (go get -u)!
2017-03-02fusefrontend: when chown'ing a directory, also chown its dirivJakob Unterwurzacher
When filename encryption is active, every directory contains a "gocryptfs.diriv" file. This file should also change the owner. Fixes https://github.com/rfjakob/gocryptfs/issues/86
2017-01-29ctlsock: better error message for forward mode path decryptionJakob Unterwurzacher
2017-01-26fusefrontend: fix hard-linking with long nameJakob Unterwurzacher
This used to incorrectly try to link twice and return EEXIST.
2016-11-28fusefrontend: preserve owner for symlinksJakob Unterwurzacher
https://github.com/rfjakob/gocryptfs/issues/64
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 10:15:35 +0000