aboutsummaryrefslogtreecommitdiff
path: root/internal/fusefrontend
AgeCommit message (Collapse)Author
2018-08-11reverse mode: add --exclude optionJakob Unterwurzacher
https://github.com/rfjakob/gocryptfs/issues/235
2018-07-22fusefronted: disallow writes running concurrently with readsJakob Unterwurzacher
As uncovered by xfstests generic/465, concurrent reads and writes could lead to this, doRead 3015532: corrupt block #1039: stupidgcm: message authentication failed, as the read could pick up a block that has not yet been completely written - write() is not atomic! Now writes take ContentLock exclusively, while reads take it shared, meaning that multiple reads can run in parallel with each other, but not with a write. This also simplifies the file header locking.
2018-07-15fusefrontend: doWrite: delete file header if first write failsJakob Unterwurzacher
xfstests generic/083 fills the filesystem almost completely while running fsstress in parallel. In fsck, these would show up: readFileID 2580: incomplete file, got 18 instead of 19 bytes This could happen when writing the file header works, but writing the actual data fails. Now we kill the header again by truncating the file to zero.
2018-07-15fusefrontend: doWrite: no need to take HeaderLock.RLock()Jakob Unterwurzacher
Other writers are blocked by ContentLock already.
2018-07-14fusefrontend: log prealloc failures at Info levelJakob Unterwurzacher
If the underlying filesystem is full, it is normal get ENOSPC here. Log at Info level instead of Warning. Fixes xfstests generic/015 and generic/027, which complained about the extra output.
2018-07-04macos: fix O_DIRECT build failureJakob Unterwurzacher
O_DIRECT has no direct equivalent on MacOS (check out https://github.com/libuv/libuv/issues/1600 for details). Just define it to zero there.
2018-07-02fusefrontend: disallow O_DIRECT and fall back to buffered IOJakob Unterwurzacher
O_DIRECT accesses must be aligned in both offset and length. Due to our crypto header, alignment will be off, even if userspace makes aligned accesses. Running xfstests generic/013 on ext4 used to trigger lots of EINVAL errors due to missing alignment. Just fall back to buffered IO.
2018-07-02fusefronted: downgrade fallocate message severityJakob Unterwurzacher
The message causes output mismatches in xfstests generic/112. Downgrade the severity to Info so it gets disabled when using "-q".
2018-07-01Fix golint warningsJakob Unterwurzacher
2018-07-01fusefrontend: add File.SeekData() functionJakob Unterwurzacher
This function will enable "gocryptfs -fsck" to handle sparse files efficiently.
2018-07-01fusefrontend: export "File" typeJakob Unterwurzacher
"gocryptfs -fsck" will need access to helper functions, and to get that, it will need to cast a gofuse.File to a fusefrontend.File. Make fusefrontend.File exported to make this work.
2018-07-01fsck: rename "CorruptItems" channel to "MitigatedCorruptions"Jakob Unterwurzacher
Make it clear that this channel is only used to report corruptions that are transparently mitigated and do not return an error to the user.
2018-06-19Fix three golint warningsJakob Unterwurzacher
We are clean again. Warnings were: internal/fusefrontend/fs.go:443:14: should omit type string from declaration of var cTarget; it will be inferred from the right-hand side internal/fusefrontend/xattr.go:26:1: comment on exported method FS.GetXAttr should be of the form "GetXAttr ..." internal/syscallcompat/sys_common.go:9:7: exported const PATH_MAX should have comment or be unexported
2018-06-12xattr: return EOPNOTSUPP instead of ENODATA in GetXattrJakob Unterwurzacher
Reading system.posix_acl_access and system.posix_acl_default should return EOPNOTSUPP to inform user-space that we do not support ACLs. xftestest essientially does chacl -l | grep "Operation not supported" to determine if the filesystem supports ACLs, and used to wrongly believe that gocryptfs does.
2018-05-27xattr: use LGet/LSet etcJakob Unterwurzacher
Support has been merged into the xattr package ( https://github.com/pkg/xattr/pull/29 ), use it.
2018-05-15xattr: return EOPNOTSUPP for unsupported attributesJakob Unterwurzacher
mv is unhappy when we return EPERM when it tries to set system.posix_acl_access: mv: preserving permissions for ‘b/x’: Operation not permitted Now we return EOPNOTSUPP like tmpfs does and mv seems happy.
2018-05-10xattr: optimize storage, store as binary instead of bae64Bolshevik
Values a binary-safe, there is no need to base64-encode them. Old, base64-encoded values are supported transparently on reading. Writing xattr values now always writes them binary.
2018-05-07xattr: added passing of a "flags" parameterBolshevik
Pass the "flags" parameter to the lower layer syscall. This makes Apple applications being able to successfully save data.
2018-05-01fusefrontend: xattr: return ENOSYS on unsupported flagsJakob Unterwurzacher
We previously returned EPERM to prevent the kernel from blacklisting our xattr support once we get an unsupported flag, but this causes lots of trouble on MacOS: Cannot save files from GUI apps, see https://github.com/rfjakob/gocryptfs/issues/229 Returning ENOSYS triggers the dotfiles fallback on MacOS and fixes the issue.
2018-04-17Improved xattr handling on non-linux systems (#227)bolshevik
* Fixed xattr filtering for MacOS. "system." and "user." prefixes are only relevant for Linux. * Small cleanup and additional tests.
2018-04-03fsck: report skipped corrupt filesJakob Unterwurzacher
OpenDir and ListXAttr skip over corrupt entries, readFileID treats files the are too small as empty. This improves usability in the face of corruption, but hides the problem in a log message instead of putting it in the return code. Create a channel to report these corruptions to fsck so it can report them to the user. Also update the manpage and the changelog with the -fsck option. Closes https://github.com/rfjakob/gocryptfs/issues/191
2018-04-02fusefrontend: xattr: return ENODATA for security.* and system.*Jakob Unterwurzacher
"ls -l" queries security.selinux, system.posix_acl_access, system.posix_acl_default and throws error messages if it gets something else than ENODATA.
2018-04-02fsck: clean up log outputJakob Unterwurzacher
Make sure we get only 1 warning output per problem. Also, add new corruption types to broken_fs_v1.4.
2018-04-01fusefronted: reject oversized Read and Write requestsJakob Unterwurzacher
This should not happen via FUSE as the kernel caps the size, but with fsck we have the first user that calls Read directly. For symmetry, check it for Write as well.
2018-03-28Switch from private copy to pkg/xattrJakob Unterwurzacher
Now that https://github.com/pkg/xattr/pull/24 has been merged there is no reason to keep our private copy. Switch to the upstream version.
2018-03-25fusefrontend: handle empty xattrs efficientlyJakob Unterwurzacher
We handle empty files by storing an actual empty file on disk. Handle xattrs similarily and encrypt the empty value to the empty value.
2018-03-25fusefrontend: add xattr supportJakob Unterwurzacher
At the moment, only for reverse mode. https://github.com/rfjakob/gocryptfs/issues/217
2018-03-24fusefrontend: create helpers for symlink encryptionJakob Unterwurzacher
These will be reused by the upcoming xattr support.
2018-02-28tlog: stop embedding log.Logger to prevent mistakesJakob Unterwurzacher
A few places have called tlog.Warn.Print, which directly calls into log.Logger due to embedding, losing all features of tlog. Stop embedding log.Logger to make sure the internal functions cannot be called accidentially and fix (several!) instances that did.
2018-02-18fusefrontend[_reverse]: move crypto init up to callerJakob Unterwurzacher
Both fusefrontend and fusefrontend_reverse were doing essentially the same thing, move it into main's initFuseFrontend. A side-effect is that we have a reference to cryptocore in main, which will help with wiping the keys on exit (https://github.com/rfjakob/gocryptfs/issues/211).
2018-01-25fusefrontend: drop unused haveGetdents warningJakob Unterwurzacher
We don't actually print that warning anymore.
2018-01-17fusefronted: add PlaintextNames special-cases for Create & RenameJakob Unterwurzacher
gocryptfs.longname.XXX files were considered magic in PlaintextNames mode, which was wrong. Fix that and add tests. Fixes https://github.com/rfjakob/gocryptfs/issues/174
2017-12-25fusefrontend: Use Linkat syscall to implement LinkSebastian Lackner
2017-12-25fusefrontend: Handle PlaintextNames mode in LinkSebastian Lackner
In PlaintextNames mode the "gocryptfs.longname." prefix does not have any special meaning. https://github.com/rfjakob/gocryptfs/issues/174
2017-12-03syscallcompat: convert Getdents to fd input, add emulationJakob Unterwurzacher
Now that we have Fstatat we can use it in Getdents to get rid of the path name. Also, add an emulated version of getdents for MacOS. This allows to drop the !HaveGetdents special cases from fusefrontend. Modify the getdents test to test both native getdents and the emulated version.
2017-12-01fusefrontend: Improve documentation of mkdirWithIv and WriteDirIVSebastian Lackner
As requested in https://github.com/rfjakob/gocryptfs/pull/179
2017-11-30syscallcompat: check that we get NOFOLLOW wherever possibleJakob Unterwurzacher
...and fix the instances where the AT_SYMLINK_NOFOLLOW / O_NOFOLLOW / O_EXCL flag was missing.
2017-11-29fusefrontend: allow_other: close race between mkdir and chownSebastian Lackner
Fixes the same problem as described in 72b975867a3b9bdf53fc2da62e2ba4a328d7e4ab, except for directories instead of device nodes.
2017-11-29fusefrontend: Use Fchownat to implement ChownSebastian Lackner
2017-11-29fusefrontend: Use Fchmodat to implement ChmodSebastian Lackner
2017-11-29syscallcompat: Introduce unlinkat syscall with flags argumentSebastian Lackner
2017-11-28fusefrontend: Use openBackingPath in Unlink and simplify codeSebastian Lackner
2017-11-28fusefrontend: Handle PlaintextNames mode in UnlinkSebastian Lackner
In PlaintextNames mode the "gocryptfs.longname." prefix does not have any special meaning. We should not attempt to delete any .name files. Partially fixes https://github.com/rfjakob/gocryptfs/issues/174
2017-11-28fusefrontend: Introduce a openBackingPath helper and use it to simplify ↵Sebastian Lackner
Mknod and Symlink
2017-11-28fusefrontend: allow_other: close race between symlink and chownSebastian Lackner
Fixes the same problem as described in 72b975867a3b9bdf53fc2da62e2ba4a328d7e4ab, except for symlinks instead of device nodes.
2017-11-28fusefrontend: Use the Symlinkat syscall for longname handlingSebastian Lackner
2017-11-28fusefrontend: Set owner after symlink creation in PlaintextNames modeSebastian Lackner
This is already done in regular mode, but was missing when PlaintextNames mode is enabled. As a result, symlinks created by non-root users were still owned by root afterwards. Fixes https://github.com/rfjakob/gocryptfs/issues/176
2017-11-28fusefrontend: Handle PlaintextNames mode in MknodSebastian Lackner
In PlaintextNames mode the "gocryptfs.longname." prefix does not have any special meaning. We should not attempt to read the directory IV or to create special .name files. Partially fixes https://github.com/rfjakob/gocryptfs/issues/174
2017-11-27fusefronted: allow_other: close race between mknod and chownJakob Unterwurzacher
If the user manages to replace the directory with a symlink at just the right time, we could be tricked into chown'ing the wrong file. This change fixes the race by using fchownat, which unfortunately is not available on darwin, hence a compat wrapper is added. Scenario, as described by @slackner at https://github.com/rfjakob/gocryptfs/issues/177 : 1. Create a forward mount point with `plaintextnames` enabled 2. Mount as root user with `allow_other` 3. For testing purposes create a file `/tmp/file_owned_by_root` which is owned by the root user 4. As a regular user run inside of the GoCryptFS mount: ``` mkdir tempdir mknod tempdir/file_owned_by_root p & mv tempdir tempdir2 ln -s /tmp tempdir ``` When the steps are done fast enough and in the right order (run in a loop!), the device file will be created in `tempdir`, but the `lchown` will be executed by following the symlink. As a result, the ownership of the file located at `/tmp/file_owned_by_root` will be changed.
2017-11-25fusefrontend: Skip gocryptfs.diriv handling when directory was deleted ↵Sebastian Lackner
successfully Fixes https://github.com/rfjakob/gocryptfs/issues/171 Steps to reproduce: * Create a regular forward mount point * Create a new directory in the mount point * Manually delete the gocryptfs.diriv file from the corresponding ciphertext directory * Attempt to delete the directory with 'rmdir <dirname>' Although the code explicitly checks for empty directories, it will still attempt to move the non-existent gocryptfs.diriv file and fails with: rmdir: failed to remove '<dirname>': No such file or directory