aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-28syscallcompat: Fix Fchownat syscall wrapper on darwinSebastian Lackner
* Acquire the lock before reading the current directory * Fix a file descriptor leak
2017-11-27fusefronted: allow_other: close race between mknod and chownJakob Unterwurzacher
If the user manages to replace the directory with a symlink at just the right time, we could be tricked into chown'ing the wrong file. This change fixes the race by using fchownat, which unfortunately is not available on darwin, hence a compat wrapper is added. Scenario, as described by @slackner at https://github.com/rfjakob/gocryptfs/issues/177 : 1. Create a forward mount point with `plaintextnames` enabled 2. Mount as root user with `allow_other` 3. For testing purposes create a file `/tmp/file_owned_by_root` which is owned by the root user 4. As a regular user run inside of the GoCryptFS mount: ``` mkdir tempdir mknod tempdir/file_owned_by_root p & mv tempdir tempdir2 ln -s /tmp tempdir ``` When the steps are done fast enough and in the right order (run in a loop!), the device file will be created in `tempdir`, but the `lchown` will be executed by following the symlink. As a result, the ownership of the file located at `/tmp/file_owned_by_root` will be changed.
2017-11-26reverse: reject too-long symlink target reads with ENAMETOOLONGJakob Unterwurzacher
If the symlink target gets too long due to base64 encoding, we should return ENAMETOOLONG instead of having the kernel reject the data and returning an I/O error to the user. Fixes https://github.com/rfjakob/gocryptfs/issues/167
2017-11-25fusefrontend_reverse: Do not mix up cache information for different directoriesSebastian Lackner
Fixes https://github.com/rfjakob/gocryptfs/issues/168 Steps to reproduce the problem: * Create a regular reverse mount point * Create files with the same very long name in multiple directories - so far everything works as expected, and it will appear with a different name each time, for example, gocryptfs.longname.A in directory A and gocryptfs.longname.B in directory B * Try to access a path with A/gocryptfs.longname.B or B/gocryptfs.longname.A - this should fail, but it actually works. The problem is that the longname cache only uses the path as key and not the dir or divIV. Assume an attacker can directly interact with a reverse mount and knows the relation longname path -> unencoded path in one directory, it allows to test if the same unencoded filename appears in any other directory.
2017-11-25fusefrontend: Skip gocryptfs.diriv handling when directory was deleted ↵Sebastian Lackner
successfully Fixes https://github.com/rfjakob/gocryptfs/issues/171 Steps to reproduce: * Create a regular forward mount point * Create a new directory in the mount point * Manually delete the gocryptfs.diriv file from the corresponding ciphertext directory * Attempt to delete the directory with 'rmdir <dirname>' Although the code explicitly checks for empty directories, it will still attempt to move the non-existent gocryptfs.diriv file and fails with: rmdir: failed to remove '<dirname>': No such file or directory
2017-11-25fusefrontend: Fix longname handling for renames with existing targetSebastian Lackner
Fixes https://github.com/rfjakob/gocryptfs/issues/170 Steps to reproduce the problem: * Create a regular forward mount point * Create a file with a shortname and one with a long filename * Try to run 'mv <shortname> <longname>' This should actually work and replace the existing file, but instead it fails with: mv: cannot move '<shortname>' to '<longname>': File exists The problem is the creation of the .name file. If the target already exists we can safely ignore the EEXIST error and just keep the existing .name file.
2017-11-23tests: Add test for access to encrypted version of '.' and '..'Sebastian Lackner
To show that https://github.com/rfjakob/gocryptfs/issues/163 has been fixed.
2017-11-22fusefrontend_reverse: Add a missing Close() callSebastian Lackner
2017-11-22nametransform: Return error if decrypted name is '.' or '..'Sebastian Lackner
2017-11-21main: Add '-devrandom' commandline optionSebastian Lackner
Allows to use /dev/random for generating the master key instead of the default Go implementation. When the kernel random generator has been properly initialized both are considered equally secure, however: * Versions of Go prior to 1.9 just fall back to /dev/urandom if the getrandom() syscall would be blocking (Go Bug #19274) * Kernel versions prior to 3.17 do not support getrandom(), and there is no check if the random generator has been properly initialized before reading from /dev/urandom This is especially useful for embedded hardware with low-entroy. Please note that generation of the master key might block indefinitely if the kernel cannot harvest enough entropy.
2017-11-15main: print clear error message if CIPHERDIR is missingJakob Unterwurzacher
Getting just the help text in response to gocryptfs -info -config external.config is confusing: https://github.com/rfjakob/gocryptfs/issues/157
2017-11-12main: add "-sharedstorage" flagJakob Unterwurzacher
At the moment, it does two things: 1. Disable stat() caching so changes to the backing storage show up immediately. 2. Disable hard link tracking, as the inode numbers on the backing storage are not stable when files are deleted and re-created behind our back. This would otherwise produce strange "file does not exist" and other errors. Mitigates https://github.com/rfjakob/gocryptfs/issues/156
2017-11-12test.bash: don't run "go tool vet" if vendor dir existsJakob Unterwurzacher
...this fails in a thousand ways: [...] vendor/golang.org/x/crypto/sha3/keccakf_amd64.s:324: [amd64] keccakF1600: unknown variable state; offset 0 is a+0(FP) vendor/golang.org/x/crypto/ssh/certs.go:172: declaration of "err" shadows declaration at vendor/golang.org/x/crypto/ssh/certs.go:166 vendor/golang.org/x/crypto/ssh/certs.go:187: declaration of "rest" shadows declaration at vendor/golang.org/x/crypto/ssh/certs.go:161 vendor/golang.org/x/crypto/ssh/certs.go:187: declaration of "ok" shadows declaration at vendor/golang.org/x/crypto/ssh/certs.go:161 vendor/golang.org/x/crypto/ssh/client_auth.go:226: declaration of "err" shadows declaration at vendor/golang.org/x/crypto/ssh/client_auth.go:193 vendor/golang.org/x/crypto/ssh/client_auth.go:394: declaration of "err" shadows declaration at vendor/golang.org/x/crypto/ssh/client_auth.go:380 vendor/golang.org/x/crypto/ssh/client_auth.go:405: declaration of "err" shadows declaration at vendor/golang.org/x/crypto/ssh/client_auth.go:380 vendor/golang.org/x/crypto/ssh/handshake.go:566: declaration of "err" shadows declaration at vendor/golang.org/x/crypto/ssh/handshake.go:547 vendor/golang.org/x/crypto/ssh/handshake.go:592: declaration of "err" shadows declaration at vendor/golang.org/x/crypto/ssh/handshake.go:547 vendor/golang.org/x/crypto/ssh/handshake.go:630: declaration of "err" shadows declaration at vendor/golang.org/x/crypto/ssh/handshake.go:620 [...]
2017-11-01package-source.bash: replace plus sign in file nameJakob Unterwurzacher
Plus signs are apparently not supported on github, and replaced by a dot.
2017-11-01package-source.bash: create VERSION filev1.4.2Jakob Unterwurzacher
...and delete if after packaging is done.
2017-11-01README: Update changelog for v1.4.2Jakob Unterwurzacher
2017-11-01dep: update dependenciesJakob Unterwurzacher
2017-11-01travis: update Go versionsJakob Unterwurzacher
...to latest point releases acc. to https://golang.org/dl/
2017-11-01Add source packaging scriptJakob Unterwurzacher
2017-11-01build.bash: support VERSION file and vendored go-fuseJakob Unterwurzacher
Prepares for the release of all-in-one source tarballs that include all non-stdlib dependencies.
2017-10-31main: disallow recursively encrypting ourselvesJakob Unterwurzacher
From https://github.com/rfjakob/gocryptfs/issues/150: mkdir a mkdir a/b gocryptsfs -init -reverse a/ gocryptfs -reverse a/ a/b Now directory a/b/ contains encrypted view of 'a' but it is possible to descend into encrypted version of b (e.g. a/b/43873uhj538765387/) which contains double encrypted 'a' and so on. Reported-by: https://github.com/tigmac
2017-10-22tests: don't read /proc, the number of entries changes too quicklyJakob Unterwurzacher
This could lead to test failures like this: --- FAIL: TestGetdents (0.02s) getdents_test.go:57: len(getdentsEntries)=362, len(readdirEntries)=360 FAIL
2017-10-22Revert "test.bash: use "go vet" instead of "go tool vet""Jakob Unterwurzacher
"go vet" on Go 1.8 and older does not support flags: $ go version go version go1.8.3 linux/amd64 $ ./test.bash gocryptfs v1.4.1-27-g8c1b363 without_openssl; go-fuse v20170619-21-gcf21bc2; 2017-10-22 go1.8.3 gocryptfs v1.4.1-27-g8c1b363; go-fuse v20170619-21-gcf21bc2; 2017-10-22 go1.8.3 flag provided but not defined: -all usage: vet [-n] [-x] [build flags] [packages] Vet runs the Go vet command on the packages named by the import paths. For more about vet, see 'go doc cmd/vet'. For more about specifying packages, see 'go help packages'. To run the vet tool with specific options, run 'go tool vet'. The -n flag prints commands that would be executed. The -x flag prints commands as they are executed. For more about build flags, see 'go help build'. See also: go fmt, go fix. This reverts commit a1170be979cb75da11e84f45f67d3f5468d97669.
2017-10-22reverse mode: disable ClientInodes (hard link tracking)Jakob Unterwurzacher
Disable hard link tracking to avoid strange breakage on duplicate inode numbers ( https://github.com/rfjakob/gocryptfs/issues/149 ). Reverse mode is read-only, so we don't need a working link().
2017-10-22test.bash: use "go vet" instead of "go tool vet"Jakob Unterwurzacher
"go vet" automatically skips the vendor directory. "go tool vet" does not, and it will complain about a lot of things in there.
2017-10-21Always set "max_read" kernel optionJakob Unterwurzacher
We use fixed-size byte slice pools (sync.Pool) and cannot handle larger requests. So ask the kernel to not send bigger ones. Fixes https://github.com/rfjakob/gocryptfs/issues/145
2017-10-21Revert most of "fusefrontend: clamp oversized reads"Jakob Unterwurzacher
We cannot return less data than requested to the kernel! From https://libfuse.github.io/doxygen/structfuse__operations.html: Read should return exactly the number of bytes requested except on EOF or error, otherwise the rest of the data will be substituted with zeroes. Reverts commit 3009ec9852316c3c696f77f476390ab5a6d8d6d7 minus the formatting improvements we want to keep. Fixes https://github.com/rfjakob/gocryptfs/issues/147 Reopens https://github.com/rfjakob/gocryptfs/issues/145
2017-10-19MANPAGE: explain that you may have to pass -aessiv with -masterkeyJakob Unterwurzacher
...if the filesystem was created with that option (or reverse mode). Mitigates https://github.com/rfjakob/gocryptfs/issues/148
2017-10-19contentenc: reserve one additional block in CReqPoolJakob Unterwurzacher
...to account for unaligned reads. I have not seen this happen in the wild because the kernel always seems to issue 4k-aligned requests. But the cost of the additional block in the pool is low and prevents a buffer overrun panic when an unaligned read does happen.
2017-10-18main: call logger with full pathJakob Unterwurzacher
If $PATH contains the mountpoint, searching through it will lock us up. Use an absolute path to avoid looking at $PATH. Fixes https://github.com/rfjakob/gocryptfs/issues/146
2017-10-17fusefrontend: clamp oversized readsJakob Unterwurzacher
Our byte cache pools are sized acc. to MAX_KERNEL_WRITE, but the running kernel may have a higher limit set. Clamp to what we can handle. Fixes a panic on a Synology NAS reported at https://github.com/rfjakob/gocryptfs/issues/145
2017-10-03fusefrontend_reverse: workaround ext4 test failureJakob Unterwurzacher
The extended TestLongnameStat() exposes a pathological case when run on ext4, as ext4 reuses inode numbers immediately. This change modifies the test to not delete the files immediately, so the inode numbers cannot be reused immediately. Fix for the underlying issue is a TODO.
2017-10-01fusefrontend_reverse: fix 176-byte namesJakob Unterwurzacher
A file with a name of exactly 176 bytes length caused this error: ls: cannot access ./tmp/dsg/sXSGJLTuZuW1FarwIkJs0w/b6mGjdxIRpaeanTo0rbh0A/QjMRrQZC_4WLhmHI1UOBcA/gocryptfs.longname.QV-UipdDXeUVdl05WruoEzBNPrQCfpu6OzJL0_QnDKY: No such file or directory ls: cannot access ./tmp/dsg/sXSGJLTuZuW1FarwIkJs0w/b6mGjdxIRpaeanTo0rbh0A/QjMRrQZC_4WLhmHI1UOBcA/gocryptfs.longname.QV-UipdDXeUVdl05WruoEzBNPrQCfpu6OzJL0_QnDKY.name: No such file or directory -????????? ? ? ? ? ? gocryptfs.longname.QV-UipdDXeUVdl05WruoEzBNPrQCfpu6OzJL0_QnDKY -????????? ? ? ? ? ? gocryptfs.longname.QV-UipdDXeUVdl05WruoEzBNPrQCfpu6OzJL0_QnDKY.name Root cause was a wrong shortNameMax constant that failed to account for the obligatory padding byte. Fix the constant and also expand the TestLongnameStat test case to test ALL file name lengths from 1-255 bytes. Fixes https://github.com/rfjakob/gocryptfs/issues/143 .
2017-09-17siv_aead: fix trivial typo in commentJakob Unterwurzacher
2017-09-17contentenc: deduplicate AD packing into new concatAD() funcJakob Unterwurzacher
The encrypt and decrypt path both had a copy that were equivalent but ordered differently, which was confusing. Consolidate it in a new dedicated function.
2017-09-17contentenc: DecryptBlocks: give block number counter a clearer nameJakob Unterwurzacher
Using firstBlockNo as the counter is confusing, create a copy named "blockNo" and use that.
2017-09-10performance.txt: specify READ testsJakob Unterwurzacher
2017-09-06build.bash: make reproduceable builds easierJakob Unterwurzacher
* Reduce the build time precision from seconds to days * Allow to specify an arbitrary build date through an env variable
2017-09-06Add "dep" files: Gopkg.toml and Gopkg.lockJakob Unterwurzacher
Allows users to get a reproduceable build. Still needs to be integrated into build.bash. Suggested at https://github.com/rfjakob/gocryptfs/issues/142
2017-09-05macos: automatically remove .DS_Store on RmdirJakob Unterwurzacher
MacOS sprinkles .DS_Store files everywhere. This is hard to avoid for users, so handle it transparently in Rmdir(). Mitigates https://github.com/rfjakob/gocryptfs/issues/140
2017-09-05fusefrontend: reorder logic in Rmdir to get rid of one indentation levelJakob Unterwurzacher
Handle the errors first so that the normal code path is not indented. This should not cause any behavoir changes.
2017-09-05macos: don't throw IO errors because of .DS_Store filesJakob Unterwurzacher
MacOS creates lots of these files, and if the directory is otherwise empty, we would throw an IO error to the unsuspecting user. With this patch, we log a warning, but otherwise pretend we did not see it. Mitigates https://github.com/rfjakob/gocryptfs/issues/140
2017-09-03syscallcompat: Getdents: warn once if we get DT_UNKNOWNJakob Unterwurzacher
...and if Getdents is not available at all. Due to this warning I now know that SSHFS always returns DT_UNKNOWN: gocryptfs[8129]: Getdents: convertDType: received DT_UNKNOWN, falling back to Lstat This behavoir is confirmed at http://ahefner.livejournal.com/16875.html: "With sshfs, I finally found that obscure case. The dtype is always set to DT_UNKNOWN [...]"
2017-09-03performance.txt: update for v1.4.1 latest commits, and kernel updateJakob Unterwurzacher
$ uname -a Linux brikett 4.12.5-300.fc26.x86_64 #1 SMP Mon Aug 7 15:27:25 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
2017-09-03fusefrontend: use DirIVCache in OpenDir()Jakob Unterwurzacher
Previously, OpenDir() did not use the cache at all, missing an opportunity to speed up repeated directory reads.
2017-09-03dirivcache: add better function comments + a sanity check on Store()Jakob Unterwurzacher
The comments were unclear on whether relative or absolute paths have to be passed.
2017-09-03profiling: add write-trace.bashJakob Unterwurzacher
Save an execution trace of writing 100MB of data to a new gocryptfs mount on /tmp
2017-09-02travis ci: also test Go 1.9Jakob Unterwurzacher
2017-08-21Fix misspellings reported by goreportcard.comJakob Unterwurzacher
https://goreportcard.com/report/github.com/rfjakob/gocryptfs#misspell
2017-08-21MANPAGE: update exit codesJakob Unterwurzacher
The exit codes have been documented in CLI_ABI.md for a while, but they should also be listed in the man page. Also fix the rendering of "[-o COMMA-SEPARATED-OPTIONS]", where the square brackets where interpreted as something. Escape all square brackets to be safe.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 05:32:23 +0000