summaryrefslogtreecommitdiff
path: root/internal
diff options
context:
space:
mode:
Diffstat (limited to 'internal')
-rw-r--r--internal/fusefrontend/file.go110
-rw-r--r--internal/fusefrontend/file_allocate_truncate.go16
-rw-r--r--internal/fusefrontend/write_lock.go64
3 files changed, 106 insertions, 84 deletions
diff --git a/internal/fusefrontend/file.go b/internal/fusefrontend/file.go
index 44146d6..b616d49 100644
--- a/internal/fusefrontend/file.go
+++ b/internal/fusefrontend/file.go
@@ -40,11 +40,11 @@ type file struct {
contentEnc *contentenc.ContentEnc
// Device and inode number uniquely identify the backing file
devIno DevInoStruct
- // File header
- header *contentenc.FileHeader
+ // Entry in the open file map
+ fileTableEntry *openFileEntryT
// go-fuse nodefs.loopbackFile
loopbackFile nodefs.File
- // Store what the last byte was written
+ // Store where the last byte was written
lastWrittenOffset int64
// The opCount is used to judge whether "lastWrittenOffset" is still
// guaranteed to be correct.
@@ -60,14 +60,15 @@ func NewFile(fd *os.File, writeOnly bool, contentEnc *contentenc.ContentEnc) (no
return nil, fuse.ToStatus(err)
}
di := DevInoFromStat(&st)
- wlock.register(di)
+ t := openFileMap.register(di)
return &file{
- fd: fd,
- writeOnly: writeOnly,
- contentEnc: contentEnc,
- devIno: di,
- loopbackFile: nodefs.NewLoopbackFile(fd),
+ fd: fd,
+ writeOnly: writeOnly,
+ contentEnc: contentEnc,
+ devIno: di,
+ fileTableEntry: t,
+ loopbackFile: nodefs.NewLoopbackFile(fd),
}, fuse.OK
}
@@ -84,44 +85,39 @@ func (f *file) InnerFile() nodefs.File {
func (f *file) SetInode(n *nodefs.Inode) {
}
-// readHeader - load the file header from disk
-//
-// Returns io.EOF if the file is empty
-func (f *file) readHeader() error {
+// readFileID loads the file header from disk and extracts the file ID.
+// Returns io.EOF if the file is empty.
+func (f *file) readFileID() ([]byte, error) {
buf := make([]byte, contentenc.HeaderLen)
_, err := f.fd.ReadAt(buf, 0)
if err != nil {
- return err
+ return nil, err
}
h, err := contentenc.ParseHeader(buf)
if err != nil {
- return err
+ return nil, err
}
- f.header = h
-
- return nil
+ return h.ID, nil
}
-// createHeader - create a new random header and write it to disk
-func (f *file) createHeader() error {
+// createHeader creates a new random header and writes it to disk.
+// Returns the new file ID.
+// The caller must hold fileIDLock.Lock().
+func (f *file) createHeader() (fileID []byte, err error) {
h := contentenc.RandomHeader()
buf := h.Pack()
-
// Prevent partially written (=corrupt) header by preallocating the space beforehand
- err := syscallcompat.EnospcPrealloc(int(f.fd.Fd()), 0, contentenc.HeaderLen)
+ err = syscallcompat.EnospcPrealloc(int(f.fd.Fd()), 0, contentenc.HeaderLen)
if err != nil {
tlog.Warn.Printf("ino%d: createHeader: prealloc failed: %s\n", f.devIno.ino, err.Error())
- return err
+ return nil, err
}
-
// Actually write header
_, err = f.fd.WriteAt(buf, 0)
if err != nil {
- return err
+ return nil, err
}
- f.header = h
-
- return nil
+ return h.ID, err
}
func (f *file) String() string {
@@ -137,18 +133,30 @@ func (f *file) String() string {
// Called by Read() for normal reading,
// by Write() and Truncate() for Read-Modify-Write
func (f *file) doRead(off uint64, length uint64) ([]byte, fuse.Status) {
-
- // Read file header
- if f.header == nil {
- err := f.readHeader()
+ // Make sure we have the file ID.
+ f.fileTableEntry.IDLock.RLock()
+ if f.fileTableEntry.ID == nil {
+ f.fileTableEntry.IDLock.RUnlock()
+ // Yes, somebody else may take the lock before we can. This will get
+ // the header read twice, but causes no harm otherwise.
+ f.fileTableEntry.IDLock.Lock()
+ tmpID, err := f.readFileID()
if err == io.EOF {
+ f.fileTableEntry.IDLock.Unlock()
return nil, fuse.OK
}
if err != nil {
+ f.fileTableEntry.IDLock.Unlock()
return nil, fuse.ToStatus(err)
}
+ f.fileTableEntry.ID = tmpID
+ // Downgrade the lock.
+ f.fileTableEntry.IDLock.Unlock()
+ // The file ID may change in here. This does no harm because we
+ // re-read it after the RLock().
+ f.fileTableEntry.IDLock.RLock()
}
-
+ fileID := f.fileTableEntry.ID
// Read the backing ciphertext in one go
blocks := f.contentEnc.ExplodePlainRange(off, length)
alignedOffset, alignedLength := blocks[0].JointCiphertextRange(blocks)
@@ -156,6 +164,8 @@ func (f *file) doRead(off uint64, length uint64) ([]byte, fuse.Status) {
tlog.Debug.Printf("JointCiphertextRange(%d, %d) -> %d, %d, %d", off, length, alignedOffset, alignedLength, skip)
ciphertext := make([]byte, int(alignedLength))
n, err := f.fd.ReadAt(ciphertext, int64(alignedOffset))
+ // We don't care if the file ID changes after we have read the data. Drop the lock.
+ f.fileTableEntry.IDLock.RUnlock()
if err != nil && err != io.EOF {
tlog.Warn.Printf("read: ReadAt: %s", err.Error())
return nil, fuse.ToStatus(err)
@@ -167,7 +177,7 @@ func (f *file) doRead(off uint64, length uint64) ([]byte, fuse.Status) {
tlog.Debug.Printf("ReadAt offset=%d bytes (%d blocks), want=%d, got=%d", alignedOffset, firstBlockNo, alignedLength, n)
// Decrypt it
- plaintext, err := f.contentEnc.DecryptBlocks(ciphertext, firstBlockNo, f.header.ID)
+ plaintext, err := f.contentEnc.DecryptBlocks(ciphertext, firstBlockNo, fileID)
if err != nil {
curruptBlockNo := firstBlockNo + f.contentEnc.PlainOffToBlockNo(uint64(len(plaintext)))
tlog.Warn.Printf("ino%d: doRead: corrupt block #%d: %v", f.devIno.ino, curruptBlockNo, err)
@@ -223,18 +233,28 @@ func (f *file) Read(buf []byte, off int64) (resultData fuse.ReadResult, code fus
//
// Empty writes do nothing and are allowed.
func (f *file) doWrite(data []byte, off int64) (uint32, fuse.Status) {
-
// Read header from disk, create a new one if the file is empty
- if f.header == nil {
- err := f.readHeader()
+ f.fileTableEntry.IDLock.RLock()
+ if f.fileTableEntry.ID == nil {
+ f.fileTableEntry.IDLock.RUnlock()
+ // Somebody else may write the header here, but this would do no harm.
+ f.fileTableEntry.IDLock.Lock()
+ tmpID, err := f.readFileID()
if err == io.EOF {
- err = f.createHeader()
-
+ tmpID, err = f.createHeader()
}
if err != nil {
+ f.fileTableEntry.IDLock.Unlock()
return 0, fuse.ToStatus(err)
}
+ f.fileTableEntry.ID = tmpID
+ f.fileTableEntry.IDLock.Unlock()
+ // The file ID may change in here. This does no harm because we
+ // re-read it after the RLock().
+ f.fileTableEntry.IDLock.RLock()
}
+ fileID := f.fileTableEntry.ID
+ defer f.fileTableEntry.IDLock.RUnlock()
var written uint32
status := fuse.OK
@@ -261,7 +281,7 @@ func (f *file) doWrite(data []byte, off int64) (uint32, fuse.Status) {
// Encrypt
blockOffset := b.BlockCipherOff()
- blockData = f.contentEnc.EncryptBlock(blockData, b.BlockNo, f.header.ID)
+ blockData = f.contentEnc.EncryptBlock(blockData, b.BlockNo, fileID)
tlog.Debug.Printf("ino%d: Writing %d bytes to block #%d",
f.devIno.ino, uint64(len(blockData))-f.contentEnc.BlockOverhead(), b.BlockNo)
@@ -292,7 +312,7 @@ func (f *file) doWrite(data []byte, off int64) (uint32, fuse.Status) {
// Stat() call is very expensive.
// The caller must "wlock.lock(f.devIno.ino)" otherwise this check would be racy.
func (f *file) isConsecutiveWrite(off int64) bool {
- opCount := atomic.LoadUint64(&wlock.opCount)
+ opCount := atomic.LoadUint64(&openFileMap.opCount)
return opCount == f.lastOpCount+1 && off == f.lastWrittenOffset+1
}
@@ -309,8 +329,8 @@ func (f *file) Write(data []byte, off int64) (uint32, fuse.Status) {
tlog.Warn.Printf("ino%d fh%d: Write on released file", f.devIno.ino, f.intFd())
return 0, fuse.EBADF
}
- wlock.lock(f.devIno)
- defer wlock.unlock(f.devIno)
+ f.fileTableEntry.writeLock.Lock()
+ defer f.fileTableEntry.writeLock.Unlock()
tlog.Debug.Printf("ino%d: FUSE Write: offset=%d length=%d", f.devIno.ino, off, len(data))
// If the write creates a file hole, we have to zero-pad the last block.
// But if the write directly follows an earlier write, it cannot create a
@@ -323,7 +343,7 @@ func (f *file) Write(data []byte, off int64) (uint32, fuse.Status) {
}
n, status := f.doWrite(data, off)
if status.Ok() {
- f.lastOpCount = atomic.LoadUint64(&wlock.opCount)
+ f.lastOpCount = atomic.LoadUint64(&openFileMap.opCount)
f.lastWrittenOffset = off + int64(len(data)) - 1
}
return n, status
@@ -339,7 +359,7 @@ func (f *file) Release() {
f.released = true
f.fdLock.Unlock()
- wlock.unregister(f.devIno)
+ openFileMap.unregister(f.devIno)
}
// Flush - FUSE call
diff --git a/internal/fusefrontend/file_allocate_truncate.go b/internal/fusefrontend/file_allocate_truncate.go
index f2fca22..6f27ac7 100644
--- a/internal/fusefrontend/file_allocate_truncate.go
+++ b/internal/fusefrontend/file_allocate_truncate.go
@@ -50,8 +50,8 @@ func (f *file) Allocate(off uint64, sz uint64, mode uint32) fuse.Status {
if f.released {
return fuse.EBADF
}
- wlock.lock(f.devIno)
- defer wlock.unlock(f.devIno)
+ f.fileTableEntry.writeLock.Lock()
+ defer f.fileTableEntry.writeLock.Unlock()
blocks := f.contentEnc.ExplodePlainRange(off, sz)
firstBlock := blocks[0]
@@ -100,8 +100,8 @@ func (f *file) Truncate(newSize uint64) fuse.Status {
tlog.Warn.Printf("ino%d fh%d: Truncate on released file", f.devIno.ino, f.intFd())
return fuse.EBADF
}
- wlock.lock(f.devIno)
- defer wlock.unlock(f.devIno)
+ f.fileTableEntry.writeLock.Lock()
+ defer f.fileTableEntry.writeLock.Unlock()
var err error
// Common case first: Truncate to zero
if newSize == 0 {
@@ -111,7 +111,9 @@ func (f *file) Truncate(newSize uint64) fuse.Status {
return fuse.ToStatus(err)
}
// Truncate to zero kills the file header
- f.header = nil
+ f.fileTableEntry.IDLock.Lock()
+ f.fileTableEntry.ID = nil
+ f.fileTableEntry.IDLock.Unlock()
return fuse.OK
}
// We need the old file size to determine if we are growing or shrinking
@@ -184,7 +186,9 @@ func (f *file) truncateGrowFile(oldPlainSz uint64, newPlainSz uint64) fuse.Statu
var err error
// File was empty, create new header
if oldPlainSz == 0 {
- err = f.createHeader()
+ f.fileTableEntry.IDLock.Lock()
+ _, err = f.createHeader()
+ f.fileTableEntry.IDLock.Unlock()
if err != nil {
return fuse.ToStatus(err)
}
diff --git a/internal/fusefrontend/write_lock.go b/internal/fusefrontend/write_lock.go
index 71e911e..bbab81c 100644
--- a/internal/fusefrontend/write_lock.go
+++ b/internal/fusefrontend/write_lock.go
@@ -22,7 +22,7 @@ func DevInoFromStat(st *syscall.Stat_t) DevInoStruct {
}
func init() {
- wlock.inodeLocks = make(map[DevInoStruct]*refCntMutex)
+ openFileMap.entries = make(map[DevInoStruct]*openFileEntryT)
}
// wlock - serializes write accesses to each file (identified by inode number)
@@ -30,14 +30,14 @@ func init() {
// really don't want concurrent writes there.
// Concurrent full-block writes could actually be allowed, but are not to
// keep the locking simple.
-var wlock wlockMap
+var openFileMap openFileMapT
// wlockMap - usage:
// 1) register
// 2) lock ... unlock ...
// 3) unregister
-type wlockMap struct {
- // opCount counts lock() calls. As every operation that modifies a file should
+type openFileMapT struct {
+ // opCount counts writeLock.Lock() calls. As every operation that modifies a file should
// call it, this effectively serves as a write-operation counter.
// The variable is accessed without holding any locks so atomic operations
// must be used. It must be the first element of the struct to guarantee
@@ -45,58 +45,56 @@ type wlockMap struct {
opCount uint64
// Protects map access
sync.Mutex
- inodeLocks map[DevInoStruct]*refCntMutex
+ entries map[DevInoStruct]*openFileEntryT
}
-// refCntMutex - mutex with reference count
-type refCntMutex struct {
- // Write lock for this inode
+type opCountMutex struct {
sync.Mutex
+ // Points to the opCount variable of the parent openFileMapT
+ opCount *uint64
+}
+
+func (o *opCountMutex) Lock() {
+ o.Mutex.Lock()
+ atomic.AddUint64(o.opCount, 1)
+}
+
+// refCntMutex - mutex with reference count
+type openFileEntryT struct {
// Reference count
refCnt int
+ // Write lock for this inode
+ writeLock *opCountMutex
+ // ID is the file ID in the file header.
+ ID []byte
+ IDLock sync.RWMutex
}
// register creates an entry for "ino", or incrementes the reference count
// if the entry already exists.
-func (w *wlockMap) register(di DevInoStruct) {
+func (w *openFileMapT) register(di DevInoStruct) *openFileEntryT {
w.Lock()
defer w.Unlock()
- r := w.inodeLocks[di]
+ r := w.entries[di]
if r == nil {
- r = &refCntMutex{}
- w.inodeLocks[di] = r
+ o := opCountMutex{opCount: &w.opCount}
+ r = &openFileEntryT{writeLock: &o}
+ w.entries[di] = r
}
r.refCnt++
+ return r
}
// unregister decrements the reference count for "di" and deletes the entry if
// the reference count has reached 0.
-func (w *wlockMap) unregister(di DevInoStruct) {
+func (w *openFileMapT) unregister(di DevInoStruct) {
w.Lock()
defer w.Unlock()
- r := w.inodeLocks[di]
+ r := w.entries[di]
r.refCnt--
if r.refCnt == 0 {
- delete(w.inodeLocks, di)
+ delete(w.entries, di)
}
}
-
-// lock retrieves the entry for "di" and locks it.
-func (w *wlockMap) lock(di DevInoStruct) {
- atomic.AddUint64(&w.opCount, 1)
- w.Lock()
- r := w.inodeLocks[di]
- w.Unlock()
- // this can take a long time - execute outside the wlockMap lock
- r.Lock()
-}
-
-// unlock retrieves the entry for "di" and unlocks it.
-func (w *wlockMap) unlock(di DevInoStruct) {
- w.Lock()
- r := w.inodeLocks[di]
- w.Unlock()
- r.Unlock()
-}