aboutsummaryrefslogtreecommitdiff
path: root/internal
diff options
context:
space:
mode:
Diffstat (limited to 'internal')
-rw-r--r--internal/fusefrontend/file.go38
-rw-r--r--internal/fusefrontend/file_allocate_truncate.go16
-rw-r--r--internal/openfiletable/open_file_table.go25
3 files changed, 42 insertions, 37 deletions
diff --git a/internal/fusefrontend/file.go b/internal/fusefrontend/file.go
index 9784b3e..57ec9ba 100644
--- a/internal/fusefrontend/file.go
+++ b/internal/fusefrontend/file.go
@@ -142,27 +142,27 @@ func (f *file) createHeader() (fileID []byte, err error) {
// by Write() and Truncate() for Read-Modify-Write
func (f *file) doRead(off uint64, length uint64) ([]byte, fuse.Status) {
// Make sure we have the file ID.
- f.fileTableEntry.IDLock.RLock()
+ f.fileTableEntry.HeaderLock.RLock()
if f.fileTableEntry.ID == nil {
- f.fileTableEntry.IDLock.RUnlock()
+ f.fileTableEntry.HeaderLock.RUnlock()
// Yes, somebody else may take the lock before we can. This will get
// the header read twice, but causes no harm otherwise.
- f.fileTableEntry.IDLock.Lock()
+ f.fileTableEntry.HeaderLock.Lock()
tmpID, err := f.readFileID()
if err == io.EOF {
- f.fileTableEntry.IDLock.Unlock()
+ f.fileTableEntry.HeaderLock.Unlock()
return nil, fuse.OK
}
if err != nil {
- f.fileTableEntry.IDLock.Unlock()
+ f.fileTableEntry.HeaderLock.Unlock()
return nil, fuse.ToStatus(err)
}
f.fileTableEntry.ID = tmpID
// Downgrade the lock.
- f.fileTableEntry.IDLock.Unlock()
+ f.fileTableEntry.HeaderLock.Unlock()
// The file ID may change in here. This does no harm because we
// re-read it after the RLock().
- f.fileTableEntry.IDLock.RLock()
+ f.fileTableEntry.HeaderLock.RLock()
}
fileID := f.fileTableEntry.ID
// Read the backing ciphertext in one go
@@ -174,7 +174,7 @@ func (f *file) doRead(off uint64, length uint64) ([]byte, fuse.Status) {
ciphertext := make([]byte, int(alignedLength))
n, err := f.fd.ReadAt(ciphertext, int64(alignedOffset))
// We don't care if the file ID changes after we have read the data. Drop the lock.
- f.fileTableEntry.IDLock.RUnlock()
+ f.fileTableEntry.HeaderLock.RUnlock()
if err != nil && err != io.EOF {
tlog.Warn.Printf("read: ReadAt: %s", err.Error())
return nil, fuse.ToStatus(err)
@@ -253,27 +253,27 @@ func (f *file) Read(buf []byte, off int64) (resultData fuse.ReadResult, code fus
// Empty writes do nothing and are allowed.
func (f *file) doWrite(data []byte, off int64) (uint32, fuse.Status) {
// Read header from disk, create a new one if the file is empty
- f.fileTableEntry.IDLock.RLock()
+ f.fileTableEntry.HeaderLock.RLock()
if f.fileTableEntry.ID == nil {
- f.fileTableEntry.IDLock.RUnlock()
+ f.fileTableEntry.HeaderLock.RUnlock()
// Somebody else may write the header here, but this would do no harm.
- f.fileTableEntry.IDLock.Lock()
+ f.fileTableEntry.HeaderLock.Lock()
tmpID, err := f.readFileID()
if err == io.EOF {
tmpID, err = f.createHeader()
}
if err != nil {
- f.fileTableEntry.IDLock.Unlock()
+ f.fileTableEntry.HeaderLock.Unlock()
return 0, fuse.ToStatus(err)
}
f.fileTableEntry.ID = tmpID
- f.fileTableEntry.IDLock.Unlock()
+ f.fileTableEntry.HeaderLock.Unlock()
// The file ID may change in here. This does no harm because we
// re-read it after the RLock().
- f.fileTableEntry.IDLock.RLock()
+ f.fileTableEntry.HeaderLock.RLock()
}
fileID := f.fileTableEntry.ID
- defer f.fileTableEntry.IDLock.RUnlock()
+ defer f.fileTableEntry.HeaderLock.RUnlock()
// Handle payload data
status := fuse.OK
dataBuf := bytes.NewBuffer(data)
@@ -336,7 +336,7 @@ func (f *file) doWrite(data []byte, off int64) (uint32, fuse.Status) {
// Stat() call is very expensive.
// The caller must "wlock.lock(f.devIno.ino)" otherwise this check would be racy.
func (f *file) isConsecutiveWrite(off int64) bool {
- opCount := openfiletable.WriteLockCount()
+ opCount := openfiletable.WriteOpCount()
return opCount == f.lastOpCount+1 && off == f.lastWrittenOffset+1
}
@@ -353,8 +353,8 @@ func (f *file) Write(data []byte, off int64) (uint32, fuse.Status) {
tlog.Warn.Printf("ino%d fh%d: Write on released file", f.qIno.Ino, f.intFd())
return 0, fuse.EBADF
}
- f.fileTableEntry.WriteLock.Lock()
- defer f.fileTableEntry.WriteLock.Unlock()
+ f.fileTableEntry.ContentLock.Lock()
+ defer f.fileTableEntry.ContentLock.Unlock()
tlog.Debug.Printf("ino%d: FUSE Write: offset=%d length=%d", f.qIno.Ino, off, len(data))
// If the write creates a file hole, we have to zero-pad the last block.
// But if the write directly follows an earlier write, it cannot create a
@@ -367,7 +367,7 @@ func (f *file) Write(data []byte, off int64) (uint32, fuse.Status) {
}
n, status := f.doWrite(data, off)
if status.Ok() {
- f.lastOpCount = openfiletable.WriteLockCount()
+ f.lastOpCount = openfiletable.WriteOpCount()
f.lastWrittenOffset = off + int64(len(data)) - 1
}
return n, status
diff --git a/internal/fusefrontend/file_allocate_truncate.go b/internal/fusefrontend/file_allocate_truncate.go
index acde76f..85ed11c 100644
--- a/internal/fusefrontend/file_allocate_truncate.go
+++ b/internal/fusefrontend/file_allocate_truncate.go
@@ -50,8 +50,8 @@ func (f *file) Allocate(off uint64, sz uint64, mode uint32) fuse.Status {
if f.released {
return fuse.EBADF
}
- f.fileTableEntry.WriteLock.Lock()
- defer f.fileTableEntry.WriteLock.Unlock()
+ f.fileTableEntry.ContentLock.Lock()
+ defer f.fileTableEntry.ContentLock.Unlock()
blocks := f.contentEnc.ExplodePlainRange(off, sz)
firstBlock := blocks[0]
@@ -100,8 +100,8 @@ func (f *file) Truncate(newSize uint64) fuse.Status {
tlog.Warn.Printf("ino%d fh%d: Truncate on released file", f.qIno.Ino, f.intFd())
return fuse.EBADF
}
- f.fileTableEntry.WriteLock.Lock()
- defer f.fileTableEntry.WriteLock.Unlock()
+ f.fileTableEntry.ContentLock.Lock()
+ defer f.fileTableEntry.ContentLock.Unlock()
var err error
// Common case first: Truncate to zero
if newSize == 0 {
@@ -111,9 +111,9 @@ func (f *file) Truncate(newSize uint64) fuse.Status {
return fuse.ToStatus(err)
}
// Truncate to zero kills the file header
- f.fileTableEntry.IDLock.Lock()
+ f.fileTableEntry.HeaderLock.Lock()
f.fileTableEntry.ID = nil
- f.fileTableEntry.IDLock.Unlock()
+ f.fileTableEntry.HeaderLock.Unlock()
return fuse.OK
}
// We need the old file size to determine if we are growing or shrinking
@@ -206,8 +206,8 @@ func (f *file) truncateGrowFile(oldPlainSz uint64, newPlainSz uint64) fuse.Statu
if newPlainSz%f.contentEnc.PlainBS() == 0 {
// The file was empty, so it did not have a header. Create one.
if oldPlainSz == 0 {
- f.fileTableEntry.IDLock.Lock()
- defer f.fileTableEntry.IDLock.Unlock()
+ f.fileTableEntry.HeaderLock.Lock()
+ defer f.fileTableEntry.HeaderLock.Unlock()
id, err := f.createHeader()
if err != nil {
return fuse.ToStatus(err)
diff --git a/internal/openfiletable/open_file_table.go b/internal/openfiletable/open_file_table.go
index 7cd401e..d70bcfa 100644
--- a/internal/openfiletable/open_file_table.go
+++ b/internal/openfiletable/open_file_table.go
@@ -42,13 +42,13 @@ func init() {
}
type table struct {
- // writeLockCount counts entry.writeLock.Lock() calls. As every operation that
+ // writeOpCount counts entry.ContentLock.Lock() calls. As every operation that
// modifies a file should
// call it, this effectively serves as a write-operation counter.
// The variable is accessed without holding any locks so atomic operations
// must be used. It must be the first element of the struct to guarantee
// 64-bit alignment.
- writeLockCount uint64
+ writeOpCount uint64
// Protects map access
sync.Mutex
// Table entries
@@ -59,11 +59,16 @@ type table struct {
type Entry struct {
// Reference count
refCount int
- // Write lock for this inode
- WriteLock countingMutex
+ // ContentLock guards the file content from concurrent writes. Every writer
+ // must take this lock before modifying the file content.
+ ContentLock countingMutex
+ // HeaderLock guards the file ID (in this struct) and the file header (on
+ // disk). Take HeaderLock.RLock() to make sure the file ID does not change
+ // behind your back. If you modify the file ID, you must take
+ // HeaderLock.Lock().
+ HeaderLock sync.RWMutex
// ID is the file ID in the file header.
- ID []byte
- IDLock sync.RWMutex
+ ID []byte
}
// Register creates an open file table entry for "qi" (or incrementes the
@@ -101,11 +106,11 @@ type countingMutex struct {
func (c *countingMutex) Lock() {
c.Mutex.Lock()
- atomic.AddUint64(&t.writeLockCount, 1)
+ atomic.AddUint64(&t.writeOpCount, 1)
}
-// WriteLockCount returns the write lock counter value. This value is encremented
+// WriteOpCount returns the write lock counter value. This value is encremented
// each time writeLock.Lock() on a file table entry is called.
-func WriteLockCount() uint64 {
- return atomic.LoadUint64(&t.writeLockCount)
+func WriteOpCount() uint64 {
+ return atomic.LoadUint64(&t.writeOpCount)
}