tests: rename fsstress-loopback.bash to fsstress-gocryptfs.bash

The primary use is testing gocryptfs, after all.

2 files changed, 95 insertions, 95 deletions

diff --git a/tests/stress_tests/fsstress-gocryptfs.bash b/tests/stress_tests/fsstress-gocryptfs.bash
index 44ba569..51c68db 120000..100755
--- a/tests/stress_tests/fsstress-gocryptfs.bash
+++ b/tests/stress_tests/fsstress-gocryptfs.bash
@@ -1 +1,94 @@
-fsstress-loopback.bash
\ No newline at end of file
+#!/bin/bash
+#
+# Mount a go-fuse loopback filesystem in /tmp and run fsstress against it
+# in an infinite loop, only exiting on errors.
+#
+# When called as "fsstress-gocryptfs.bash", a gocryptfs filesystem is tested
+# instead.
+#
+# This test used to fail on older go-fuse versions after a few iterations with
+# errors like this:
+# "rm: cannot remove ‘/tmp/b/fsstress.2/pd/d1XXX/f4a’: No such file or directory"
+#
+# Nowadays it should pass an indefinite number of iterations.
+
+set -eu
+
+# Backing directory
+DIR=$(mktemp -d /tmp/fsstress.XXX)
+# Mountpoint
+MNT="$DIR.mnt"
+# fsstress binary
+FSSTRESS=~/src/xfstests/ltp/fsstress
+
+if [ ! -x $FSSTRESS ]
+then
+	echo "fsstress binary not found, adjust FSSTRESS=$FSSTRESS"
+	exit 1
+fi
+
+# Setup
+fusermount -u -z $MNT &> /dev/null || true
+mkdir -p $DIR $MNT
+rm -Rf $DIR/*
+rm -Rf $MNT/*
+
+# FS-specific compile and mount
+MYNAME=$(basename $0)
+if [ $MYNAME = fsstress-loopback.bash ]; then
+	echo "Recompile go-fuse loopback"
+	cd $GOPATH/src/github.com/hanwen/go-fuse/example/loopback
+	go build && go install
+	$GOPATH/bin/loopback -l $MNT $DIR &
+	disown
+elif [ $MYNAME = fsstress-gocryptfs.bash ]; then
+	echo "Recompile gocryptfs"
+	cd $GOPATH/src/github.com/rfjakob/gocryptfs
+	./build.bash
+	$GOPATH/bin/gocryptfs -q -init -extpass "echo test" -scryptn=10 $DIR
+	$GOPATH/bin/gocryptfs -q -extpass "echo test" -nosyslog $DIR $MNT
+else
+	echo Unknown mode: $MYNAME
+	exit 1
+fi
+
+echo -n "Waiting for mount: "
+sleep 0.5
+while ! grep "$MNT fuse" /proc/self/mounts > /dev/null
+do
+	sleep 1
+	echo -n x
+done
+echo
+
+# Cleanup trap
+trap "kill %1 ; cd /; fusermount -u -z $MNT; rm -rf $DIR $MNT" EXIT
+
+echo "Starting fsstress loop"
+N=1
+while true
+do
+	echo $N
+	mkdir $MNT/fsstress.1
+	echo -n "    fsstress.1 "
+	$FSSTRESS -r -m 8 -n 1000 -d $MNT/fsstress.1 &
+	wait
+
+	mkdir $MNT/fsstress.2
+	echo -n "    fsstress.2 "
+	$FSSTRESS -p 20 -r -m 8 -n 1000 -d $MNT/fsstress.2 &
+	wait
+
+	mkdir $MNT/fsstress.3
+	echo -n "    fsstress.3 "
+	$FSSTRESS -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 \
+		-f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m 8 \
+		-n 1000 -d $MNT/fsstress.3 &
+	wait
+
+	echo "    rm"
+	rm -R $MNT/*
+
+	let N=$N+1
+done
+
diff --git a/tests/stress_tests/fsstress-loopback.bash b/tests/stress_tests/fsstress-loopback.bash
index 51c68db..139d4ec 100755..120000
--- a/tests/stress_tests/fsstress-loopback.bash
+++ b/tests/stress_tests/fsstress-loopback.bash
@@ -1,94 +1 @@
-#!/bin/bash
-#
-# Mount a go-fuse loopback filesystem in /tmp and run fsstress against it
-# in an infinite loop, only exiting on errors.
-#
-# When called as "fsstress-gocryptfs.bash", a gocryptfs filesystem is tested
-# instead.
-#
-# This test used to fail on older go-fuse versions after a few iterations with
-# errors like this:
-# "rm: cannot remove ‘/tmp/b/fsstress.2/pd/d1XXX/f4a’: No such file or directory"
-#
-# Nowadays it should pass an indefinite number of iterations.
-
-set -eu
-
-# Backing directory
-DIR=$(mktemp -d /tmp/fsstress.XXX)
-# Mountpoint
-MNT="$DIR.mnt"
-# fsstress binary
-FSSTRESS=~/src/xfstests/ltp/fsstress
-
-if [ ! -x $FSSTRESS ]
-then
-	echo "fsstress binary not found, adjust FSSTRESS=$FSSTRESS"
-	exit 1
-fi
-
-# Setup
-fusermount -u -z $MNT &> /dev/null || true
-mkdir -p $DIR $MNT
-rm -Rf $DIR/*
-rm -Rf $MNT/*
-
-# FS-specific compile and mount
-MYNAME=$(basename $0)
-if [ $MYNAME = fsstress-loopback.bash ]; then
-	echo "Recompile go-fuse loopback"
-	cd $GOPATH/src/github.com/hanwen/go-fuse/example/loopback
-	go build && go install
-	$GOPATH/bin/loopback -l $MNT $DIR &
-	disown
-elif [ $MYNAME = fsstress-gocryptfs.bash ]; then
-	echo "Recompile gocryptfs"
-	cd $GOPATH/src/github.com/rfjakob/gocryptfs
-	./build.bash
-	$GOPATH/bin/gocryptfs -q -init -extpass "echo test" -scryptn=10 $DIR
-	$GOPATH/bin/gocryptfs -q -extpass "echo test" -nosyslog $DIR $MNT
-else
-	echo Unknown mode: $MYNAME
-	exit 1
-fi
-
-echo -n "Waiting for mount: "
-sleep 0.5
-while ! grep "$MNT fuse" /proc/self/mounts > /dev/null
-do
-	sleep 1
-	echo -n x
-done
-echo
-
-# Cleanup trap
-trap "kill %1 ; cd /; fusermount -u -z $MNT; rm -rf $DIR $MNT" EXIT
-
-echo "Starting fsstress loop"
-N=1
-while true
-do
-	echo $N
-	mkdir $MNT/fsstress.1
-	echo -n "    fsstress.1 "
-	$FSSTRESS -r -m 8 -n 1000 -d $MNT/fsstress.1 &
-	wait
-
-	mkdir $MNT/fsstress.2
-	echo -n "    fsstress.2 "
-	$FSSTRESS -p 20 -r -m 8 -n 1000 -d $MNT/fsstress.2 &
-	wait
-
-	mkdir $MNT/fsstress.3
-	echo -n "    fsstress.3 "
-	$FSSTRESS -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 \
-		-f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m 8 \
-		-n 1000 -d $MNT/fsstress.3 &
-	wait
-
-	echo "    rm"
-	rm -R $MNT/*
-
-	let N=$N+1
-done
-
+fsstress-gocryptfs.bash
\ No newline at end of file